I currently ride a 2009 ZX-14, I've got a '19 H2SXSE+ on order (Feb delivery - so they tell me).
The rake and trail of my 14 is 23 degrees rake and 3.7 inches of trail.
The H2 numbers are 24.7 degrees of rake and 4.1 inches of trail.
It is worth noting that both bikes have an identical wheelbase of 58.3 inches and the 14 has a seat height of 31.5 inches while the 32.9 (so on the H2 I'll be sitting nearly an inch and a half higher).
Does this indicate to you all that I will see noticeably more sluggish turn in and less "twitchy-ness" in the H2, or are those numbers so close as to not make a noticeable difference? I have no idea if 1.7 degrees of rake is a big change.
I currently love the way the 14 handles given the weight of the beast.
Rake and Trail Comparison
- 57x
- Accelerating

- Posts: 202
- Joined: Thu Apr 19, 2018 2:45 am
- Location: California, USA
- Bike(s): 2018 H2 SX SE
- x 2
Re: Rake and Trail Comparison
They lie on the H2 SX seat height. It is about the same as the 14. I have a 30" inseam and can bend my knees at a light. Frankly, it is too low for me.
I had an 06 ZX14. The H2 SX feels more top heavy to me at slow speeds but turns better at speed.
Let's see what others think.
I had an 06 ZX14. The H2 SX feels more top heavy to me at slow speeds but turns better at speed.
Let's see what others think.
0 x
- JOHN-DYNOSTAR
- New Member

- Posts: 13
- Joined: Sat Sep 29, 2018 10:07 am
- Bike(s): zzr1400 FZS1000
Re: Rake and Trail Comparison
just to give you some Idea
1 degree roughly is the equivalent of 12mm in length on a wheelbase.
GSXR's run approx 23.5 degrees ( sharp steering)
custom bikes run 27 degrees roughly ( lazy steering )
when we had bikes running in the BSB race series some of the riders could detect the difference of 0.5 of a degree rake . but not many.
for the road 0.5 degree is not an issue.
1.7 degrees however is considerable . ie; 20mm longer.
but the swingarm /chassis could be longer/shorter
a different sprocket can adjust the length of the bike ( wheel in slots on swingarm) . this in certain circles means the
leverage on the swingarm is different and the suspension needs adjusting .
it is worth noting that if you raise the rear ride height by 6mm you will adjust the head angle by 0.5 of a degree.
and if you drop the forks through the yokes by 6mm then another 0.5 of a degree is gained.
seat height the same
possibly, but 1 degree different and sharper steering.
using this principal in reverse
this is why all lowered Busas steer like barges
hope this helps
1 degree roughly is the equivalent of 12mm in length on a wheelbase.
GSXR's run approx 23.5 degrees ( sharp steering)
custom bikes run 27 degrees roughly ( lazy steering )
when we had bikes running in the BSB race series some of the riders could detect the difference of 0.5 of a degree rake . but not many.
for the road 0.5 degree is not an issue.
1.7 degrees however is considerable . ie; 20mm longer.
but the swingarm /chassis could be longer/shorter
a different sprocket can adjust the length of the bike ( wheel in slots on swingarm) . this in certain circles means the
leverage on the swingarm is different and the suspension needs adjusting .
it is worth noting that if you raise the rear ride height by 6mm you will adjust the head angle by 0.5 of a degree.
and if you drop the forks through the yokes by 6mm then another 0.5 of a degree is gained.
seat height the same
using this principal in reverse
this is why all lowered Busas steer like barges
hope this helps
0 x
- 57x
- Accelerating

- Posts: 202
- Joined: Thu Apr 19, 2018 2:45 am
- Location: California, USA
- Bike(s): 2018 H2 SX SE
- x 2
Re: Rake and Trail Comparison
I would also think fork height would change handling. If you raise the front of the bike it slows turn-in (with the same given rear height). Without all the dimensions it is hard to compare how the two would react.
0 x
- PaulieG
- Boost Engaged

- Posts: 40
- Joined: Tue Nov 06, 2018 4:25 pm
- Location: Northern VA
- Bike(s): 2019 H2 SX SE+
- x 2
Re: Rake and Trail Comparison
Hey John, thanks a bunch for the run down, very interesting numbers. It will be interesting to line both bikes up in the garage and see what a side by side comparison looks like. I'll post some pics if it's interesting and worthwhile.
0 x
- JOHN-DYNOSTAR
- New Member

- Posts: 13
- Joined: Sat Sep 29, 2018 10:07 am
- Bike(s): zzr1400 FZS1000
Re: Rake and Trail Comparison
another interesting/non interesting point. seat height;
distance from seat to floor
I bought the most beautiful seat I have ever seen and fitted it. suddenly the footrests were too near my arse and I had cramp.
so distance seat to footrest is important.
because if you fit a comfortable seat you may not be able to reach the floor in my case
just a point to consider whilst you are measuring

distance from seat to floor
I bought the most beautiful seat I have ever seen and fitted it. suddenly the footrests were too near my arse and I had cramp.
so distance seat to footrest is important.
because if you fit a comfortable seat you may not be able to reach the floor in my case
just a point to consider whilst you are measuring
0 x
- THOR
- Accelerating

- Posts: 176
- Joined: Mon Jul 23, 2018 12:31 pm
- Location: London
- Bike(s): Kawasaki H2 SX SE
- x 1
Re: Rake and Trail Comparison
I think SX SE could do some preload or lifting on the back so it can turn more easy.
0 x
Who is online
Users browsing this forum: No registered users and 18 guests
