KiwiKodi, Reversing the bolts, is exactly .... what part at what point?KiwiKodi wrote: Sun Feb 10, 2019 6:58 pm Yeah that centre stand issue was a pain. Then I stupidly put it back together the same way instead of reversing the bolts. I didn’t like it lower as I found the cat bottomed out when entering the driveway. So as a result I have a set of lowering links (Lustracing) if anyone wants a set (for a small donation plus cost of postage).
Adding adjistable lowering links and kick stand.
Re: Adding adjistable lowering links and kick stand.
0 x
\
Re: Adding adjistable lowering links and kick stand.
I used the one for the regular H2, pretty sure I stated this in one of the 3 or 4 other threads you've talked about lowering links in.Prof J wrote: Tue Jun 25, 2019 4:43 am cOoTeR, Soupy's links do not seem to be specifically for the H2SX. Which ones did you use?
The bolts are a pain in the ass to get out which is why kiwikodi mentioned installing the bolts backwards during the install. That way if you decide to remove the links it's easier to do because the bolts won't hit the center stand bracket woke backing out.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
Re: Adding adjistable lowering links and kick stand.
The first time you go at them bolts holding the links you will most likely find that the bolts were fitted before the centre stand (if you have one) making it impossible to remove the bolts without first removing the centre stand. So really its right from the beginning. Just remember to reinstall them the opposite way round in case you want to take them off again.Prof J wrote: Tue Jun 25, 2019 5:16 amKiwiKodi, Reversing the bolts, is exactly .... what part at what point?KiwiKodi wrote: Sun Feb 10, 2019 6:58 pm Yeah that centre stand issue was a pain. Then I stupidly put it back together the same way instead of reversing the bolts. I didn’t like it lower as I found the cat bottomed out when entering the driveway. So as a result I have a set of lowering links (Lustracing) if anyone wants a set (for a small donation plus cost of postage).
I still have a set of links from Lust if anyone wants them!!!
0 x
Re: Adding adjistable lowering links and kick stand.
Thank you gentlemen. Seems like Brocks and Lust Racing are not sure the '18 year links will fit any longer, as they say the part number on the '19 is different.
0 x
\
Re: Adding adjistable lowering links and kick stand.
Possibly better without the cat, but I got the lower seat and have no issues now.Prof J wrote: Tue Jun 25, 2019 4:18 amKiwiKodi wrote: Sun Feb 10, 2019 6:58 pm Yeah that centre stand issue was a pain. Then I stupidly put it back together the same way instead of reversing the bolts. I didn’t like it lower as I found the cat bottomed out when entering the driveway. So as a result I have a set of lowering links (Lustracing) if anyone wants a set (for a small donation plus cost of postage).
KiwiKodi,
If the CAT were not there, what'd you think about the lowering?
0 x
Who is online
Users browsing this forum: Bing [Bot] and 46 guests



