zx10r on H2 Sx SE exhaust

[jet1319]

Anyone try a new model ZX10R slip-on exhaust on the H2 SX SE? I have an Austin Racing pipe from my ZX10R and was thinking would it fit?

[Snakes709]

Wont fit with our headers but with zx10r headers and spacers it will fit. Im currently working on a custom exhaust on my bike. 2011-15 headers with 2016+ yoshimura alpha 3/4 system.

[motoman]

Wont fit with our headers but with zx10r headers and spacers it will fit. Im currently working on a custom exhaust on my bike. 2011-15 headers with 2016+ yoshimura alpha 3/4 system.

Do you know what other ZX10 Headers will fit the H2 SX?

[Snakes709]

Wont fit with our headers but with zx10r headers and spacers it will fit. Im currently working on a custom exhaust on my bike. 2011-15 headers with 2016+ yoshimura alpha 3/4 system.

Do you know what other ZX10 Headers will fit the H2 SX?

the 2011-15 headers require 5mm spacers. I cant say for sure what other years would match. I would guess the 2016+ would, most likely need spacers as well but don't quote me on that. It all depends on the sleeve diameter of the header and whether or not it fits behind the rad, fairings and clears the oil pan.

[motoman]

the 2011-15 headers require 5mm spacers. I cant say for sure what other years would match. I would guess the 2016+ would, most likely need spacers as well but don't quote me on that. It all depends on the sleeve diameter of the header and whether or not it fits behind the rad, fairings and clears the oil pan.

Thanks! Can you point me to somewhere I can get the right spacers?

[Snakes709]

the 2011-15 headers require 5mm spacers. I cant say for sure what other years would match. I would guess the 2016+ would, most likely need spacers as well but don't quote me on that. It all depends on the sleeve diameter of the header and whether or not it fits behind the rad, fairings and clears the oil pan.

Thanks! Can you point me to somewhere I can get the right spacers?

I believe “THOR” on here made a few. If not, just get a shop to make them up.

[motoman]

OK thanks so much for the info. One more question: Will the Yosh Alpha T 3/4 fit onto the 2011-15 ZX-10 headers? Do I also need a Mid-pipe? And if so which one do you like, Delkevic?

[Snakes709]

OK thanks so much for the info. One more question: Will the Yosh Alpha T 3/4 fit onto the 2011-15 ZX-10 headers? Do I also need a Mid-pipe? And if so which one do you like, Delkevic?

It should, cant say for 100% as i had the alpha on my zx10r. It has the midpipe with it, thats what the “3/4” system is. The exhaust is ment for 2016+ zx10r but the headers are for a 2011-15. They will fit together if the donut gasket is removed from the collector. Just use gasket sealer paste. On the zx10r the mounting point under the rear set didnt line up but the mounting point on the muffler/passenger peg was strong enough to hold the whole system, i suspect the same thing will happy on the sx.

[THOR]

i have got it on mine , but you need a special part to fit it.

[motoman]

Thanks, what special part is that? Also can I get those spacers from you Thor?

I've got a line on the 2015 ZX10 headers, ready to buy the Yosh 3/4 and put this together if somebody can just tell me or sell me what I need! Thanks