SC gear mod

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
2HYPR
Accelerating

Accelerating
Posts: 176
Joined: Thu Jul 05, 2018 1:25 pm
Location: Shanghai
Bike(s): H2 SX SE
x 2

Re: SC gear mod

Post by 2HYPR » Fri Nov 23, 2018 1:21 am


Snakes709 wrote: Thu Nov 22, 2018 5:05 pm [
I was debating doing baseline runs but I'd rather use that money on parts for my bike. To me, numbers are numbers. I don't really care what the bike makes on paper, as long as it feels good on the street/track. That being said, I do have a goal in mind for my bike but I learned the expensive way, don't chase after hp numbers on a dyno.
Very very true...I think the best mod i have done so far has been the rims and suspension - transformed the bike... dyno is to as safe as possible get the engine burning as much fuel as efficiently as possible without blowing shit up - the HP is just one indicator of that success but i like to see big fat torque numbers as i know thats what will help me cornering.

But to some dickheads that figure is the most important thing and needed so as to include in forum signatures on the internet... like a badge or feather to make others jelly or envious (?)... which is fine i guess wankers will be wankers....
0 x

User avatar
cOoTeR
Supercharged!

Supercharged!
Posts: 1105
Joined: Fri Dec 15, 2017 3:40 am
Location: United States
x 2

Re: SC gear mod

Post by cOoTeR » Fri Nov 23, 2018 11:11 am


2HYPR wrote: Fri Nov 23, 2018 1:21 am
Snakes709 wrote: Thu Nov 22, 2018 5:05 pm [
I was debating doing baseline runs but I'd rather use that money on parts for my bike. To me, numbers are numbers. I don't really care what the bike makes on paper, as long as it feels good on the street/track. That being said, I do have a goal in mind for my bike but I learned the expensive way, don't chase after hp numbers on a dyno.
Very very true...I think the best mod i have done so far has been the rims and suspension - transformed the bike... dyno is to as safe as possible get the engine burning as much fuel as efficiently as possible without blowing shit up - the HP is just one indicator of that success but i like to see big fat torque numbers as i know thats what will help me cornering.

But to some dickheads that figure is the most important thing and needed so as to include in forum signatures on the internet... like a badge or feather to make others jelly or envious (?)... which is fine i guess wankers will be wankers....
You just can't let it go can you? And I'm the dick head? I thought this was dead and buried, you said you weren't commenting on it anymore.

I was legitimately curious how you got to your supposed 250hp and wanted to know how accurate the claim was. Before your dyno numbers were even put out I asked what mods you were doing and you refused to answer. I asked what mods had been done to your bike to get to the claimed 250hp and instead of answering you started making as kinds of excuses about how hard it is to find your dyno numbers. The numbers are just number we both agree there. But the start and finish are significant because it shows the actual percentage gained from the modifications. Which helps people decide if spending their money on modifications is worth it. I could easily find a dyno that reads higher and go get some runs done on a cold day if I was just trying to make others jealous. I could also not let anyone know what work was done to my bike and only put out a high horsepower number like you did. You intentionally put out that you knew a great way to add power too your bike but refused to share any of that information. I put out all the information I have so it can help others. Instead of being an asshole and keeping the thinks I've found to myself. It's right there in my signature and I think the only person that is jealous is the guy who can't back up his claims (that's you 2hypr). Had you not done a baseline run for monetary reasons that would have been understandable. Had you stated what your bike first made on the dyno it would have given everyone an idea of how much power your bike gained. But you didn't do either of those things. Apparently no one knows how much power your bike gained. But your butt dyno says 250hp even though your only public dyno graph says 230 something. Just like in this thread you jump in like a jerk and belittle the design of the intercooler without any suggestion to make it better. You like to be the guy who says "I know something you don't know". You're the dick head.
0 x

Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs

User avatar
2HYPR
Accelerating

Accelerating
Posts: 176
Joined: Thu Jul 05, 2018 1:25 pm
Location: Shanghai
Bike(s): H2 SX SE
x 2

Re: SC gear mod

Post by 2HYPR » Fri Nov 23, 2018 12:00 pm


I have not heard any complaints about the full and frank information I have provided via PM to forum folk who I decide to talk to....others can go watch the fence down in Arizona for all I care

Oh and its 248 on pump gas... never 250
0 x

User avatar
cOoTeR
Supercharged!

Supercharged!
Posts: 1105
Joined: Fri Dec 15, 2017 3:40 am
Location: United States
x 2

Re: SC gear mod

Post by cOoTeR » Fri Nov 23, 2018 12:20 pm


2HYPR wrote: Fri Nov 23, 2018 12:00 pm I have not heard any complaints about the full and frank information I have provided via PM to forum folk who I decide to talk to....others can go watch the fence down in Arizona for all I care

Oh and its 248 on pump gas... never 250
Yet when I asked before any of the drama you ignored me. Then I asked again and you took offense to me asking. Like you are some top secret grudge racer. Thank you for being so helpful.
0 x

Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: SC gear mod

Post by Snakes709 » Tue Nov 27, 2018 1:35 am


So my question that I been pondering the last few days, which is safer for the bike, mods + tune to achieve, lets say 220whp, obviously making the tune abit more aggressive with timing. Or mods + sc gears + more conservative tune to achieve that power. Both would have the risks of detonation due to our CR, but which would produce less of a chance. Keeping in mind you can richen the afr to help keep things cool. This is obviously without a intercooler kit.
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
2HYPR
Accelerating

Accelerating
Posts: 176
Joined: Thu Jul 05, 2018 1:25 pm
Location: Shanghai
Bike(s): H2 SX SE
x 2

Re: SC gear mod

Post by 2HYPR » Tue Nov 27, 2018 2:29 am


Snakes709 wrote: Tue Nov 27, 2018 1:35 am So my question that I been pondering the last few days, which is safer for the bike, mods + tune to achieve, lets say 220whp, obviously making the tune abit more aggressive with timing. Or mods + sc gears + more conservative tune to achieve that power. Both would have the risks of detonation due to our CR, but which would produce less of a chance. Keeping in mind you can richen the afr to help keep things cool. This is obviously without a intercooler kit.
My 2 cents worth is this.....

You can achieve 220 very easily with only a sprint filter and tune even with stock exhaust etc, you could safely get 230+ depending on your tuner with just that change no risk of detonation etc.....if 220 is your goal you will not need sc gearing change, intercooler (which does not add HP in my situation just gave controllable inlet temps) and all the rest of the mumbo jumbo.

The engine is strong enough for 220 - 230 to run all day everyday.

Be aware that the filter& tune will affect fuel consumption, on Full power mode mine now achieves a little bit over half the mileage it use to - ie 400 klm per tank is now about 230 klm (lol) .... which is why you ask your tuner to map M as the old F and leave L as is

I went mental because -

1. fool and his money are soon parted :)
2. Enough is never enough
3. If it goes pop they are going to fix.

One word of advice though is leave it tuned to pump gas (95 RON) life is much easier...
0 x

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: SC gear mod

Post by Snakes709 » Tue Nov 27, 2018 2:50 am


I suppose that 220 is easy to give. Lets use 280 an example lol.

Ill be doing 2 maps. Power and fuel econmy. Ill only use fuel economy if im doing long touring rides.
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
2HYPR
Accelerating

Accelerating
Posts: 176
Joined: Thu Jul 05, 2018 1:25 pm
Location: Shanghai
Bike(s): H2 SX SE
x 2

Re: SC gear mod

Post by 2HYPR » Tue Nov 27, 2018 5:20 am


Snakes709 wrote: Tue Nov 27, 2018 2:50 am I suppose that 220 is easy to give. Lets use 280 an example lol.

Ill be doing 2 maps. Power and fuel econmy. Ill only use fuel economy if im doing long touring rides.
Oh 280 piece of cake... 1st step buy a wrecked H2... then follow steps 1. fool and his money etc... lol

cyclenuts tune seems to achieve everything you will need... but you will not regret it - HP = Fun and as I always tell the wife - it is still cheaper than owning and caring for a horse!
0 x

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: SC gear mod

Post by Snakes709 » Tue Nov 27, 2018 6:03 am


You are missing the point lol.
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
2HYPR
Accelerating

Accelerating
Posts: 176
Joined: Thu Jul 05, 2018 1:25 pm
Location: Shanghai
Bike(s): H2 SX SE
x 2

Re: SC gear mod

Post by 2HYPR » Tue Nov 27, 2018 11:34 am


Snakes709 wrote: Tue Nov 27, 2018 6:03 am You are missing the point lol.

Oh shit I did didn't I...lol worst thing I had to re read a couple of times even with the hint... to many dumplings... :(
0 x

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests