Anyone installed a Vizi Tec brake light modulator

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
Direwlf
New Member

New Member
Posts: 23
Joined: Thu Sep 13, 2018 1:27 am

Anyone installed a Vizi Tec brake light modulator

Post by Direwlf » Tue Sep 25, 2018 3:30 am


I bought a Vizi Tec brake light modulator for my 2018 SX SE. I was wondering if anyone has installed one yet. Its a plug and play design with two connector ends that will go in series with the brake light wires.

I wasn't sure if a person can get to the wires plugs without taking something apart on the back end. Any help is appreciated! Thanks
0 x

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1396
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 387

Re: Anyone installed a Vizi Tec brake light modulator

Post by Snakes709 » Tue Sep 25, 2018 4:27 am


Whats the point of this? Integrated tail light?
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Direwlf
New Member

New Member
Posts: 23
Joined: Thu Sep 13, 2018 1:27 am

Re: Anyone installed a Vizi Tec brake light modulator

Post by Direwlf » Tue Sep 25, 2018 5:08 am


Snakes709 wrote: Tue Sep 25, 2018 4:27 am Whats the point of this? Integrated tail light?
If there wasn't a point, they might not make it in the first place. Its called conspicuity! Next :bash:
0 x

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1396
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 387

Re: Anyone installed a Vizi Tec brake light modulator

Post by Snakes709 » Tue Sep 25, 2018 5:45 am


Direwlf wrote: Tue Sep 25, 2018 5:08 am
Snakes709 wrote: Tue Sep 25, 2018 4:27 am Whats the point of this? Integrated tail light?
If there wasn't a point, they might not make it in the first place. Its called conspicuity! Next :bash:
I legit had no clue wtf it was for. No need to be a asshole
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
terrordbn
Boost Engaged

Boost Engaged
Posts: 79
Joined: Sun Sep 16, 2018 2:55 am
Location: Saint Charles, MO
Bike(s): 2018 H2SX SE

Re: Anyone installed a Vizi Tec brake light modulator

Post by terrordbn » Tue Sep 25, 2018 2:45 pm


Direwlf wrote: Tue Sep 25, 2018 3:30 am I bought a Vizi Tec brake light modulator for my 2018 SX SE. I was wondering if anyone has installed one yet. Its a plug and play design with two connector ends that will go in series with the brake light wires.

I wasn't sure if a person can get to the wires plugs without taking something apart on the back end. Any help is appreciated! Thanks
I have one sitting on my dining room table waiting for install. The SB3 has a huge variety of options!!! I plan to get it installed over the next weekend. Maybe weekend after worst case....

http://www.vizi-tec.com/

Aaron
0 x

User avatar
Direwlf
New Member

New Member
Posts: 23
Joined: Thu Sep 13, 2018 1:27 am

Re: Anyone installed a Vizi Tec brake light modulator

Post by Direwlf » Tue Sep 25, 2018 8:18 pm


terrordbn wrote: Tue Sep 25, 2018 2:45 pm
Direwlf wrote: Tue Sep 25, 2018 3:30 am I bought a Vizi Tec brake light modulator for my 2018 SX SE. I was wondering if anyone has installed one yet. Its a plug and play design with two connector ends that will go in series with the brake light wires.

I wasn't sure if a person can get to the wires plugs without taking something apart on the back end. Any help is appreciated! Thanks
I have one sitting on my dining room table waiting for install. The SB3 has a huge variety of options!!! I plan to get it installed over the next weekend. Maybe weekend after worst case....

http://www.vizi-tec.com/

Aaron
Thanks Aaron, I appreciate it!
0 x

User avatar
Direwlf
New Member

New Member
Posts: 23
Joined: Thu Sep 13, 2018 1:27 am

Re: Anyone installed a Vizi Tec brake light modulator

Post by Direwlf » Tue Sep 25, 2018 8:21 pm


Snakes709 wrote: Tue Sep 25, 2018 5:45 am
Direwlf wrote: Tue Sep 25, 2018 5:08 am
Snakes709 wrote: Tue Sep 25, 2018 4:27 am Whats the point of this? Integrated tail light?
If there wasn't a point, they might not make it in the first place. Its called conspicuity! Next :bash:
I legit had no clue wtf it was for. No need to be a asshole
I was thinking you were the way you phrased that question! No harm no foul!
0 x

User avatar
mobilemitch
New Member

New Member
Posts: 24
Joined: Thu Jun 28, 2018 2:59 am
Location: UT
Bike(s): H2 SX SE, R1M, Diavel, K1600, R6

Re: Anyone installed a Vizi Tec brake light modulator

Post by mobilemitch » Tue Sep 25, 2018 8:29 pm


I had my shop install mine. Works great! Much more conspicuous. No idea on the details of the hookup though other than I am unhappy with the box taking up so much space in the underseat "trunk"
0 x

User avatar
Direwlf
New Member

New Member
Posts: 23
Joined: Thu Sep 13, 2018 1:27 am

Re: Anyone installed a Vizi Tec brake light modulator

Post by Direwlf » Tue Sep 25, 2018 10:50 pm


mobilemitch wrote: Tue Sep 25, 2018 8:29 pm I had my shop install mine. Works great! Much more conspicuous. No idea on the details of the hookup though other than I am unhappy with the box taking up so much space in the underseat "trunk"
Thanks, I have to have mine in for warranty on the center stand now, and will just let them do it more than likely. I know its plug and play, but I can just see a scratch happening on this one lol
0 x

User avatar
57x
Accelerating

Accelerating
Posts: 202
Joined: Thu Apr 19, 2018 2:45 am
Location: California, USA
Bike(s): 2018 H2 SX SE
x 2

Re: Anyone installed a Vizi Tec brake light modulator

Post by 57x » Wed Sep 26, 2018 2:48 pm


I was the one that helped him with the wiring on the H2 SX. I have used his modulator on several bikes. It is a really easy install on the H2 SX. I love this modulator design. I feel it makes me be seen better when I stop or show down.

Pull the back seat
Remove a few screws holding the tail light
Remove the 4 push pins holding a small tail panel
Plug the modulator between the harness and tail light
Reassemble.
0 x

Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 60 guests