H2 SX/SX SE recall

Post by **roadczar** » Wed Sep 05, 2018 10:02 pm

From Facebook site, not mine.

Post by **Burmashave** » Thu Sep 06, 2018 1:12 am

Thanks!

Post by **Champ87** » Thu Sep 06, 2018 1:36 am

roadczar wrote: Wed Sep 05, 2018 10:02 pm From Facebook site, not mine.

Thanks roadczar. I inspected mine at the weekend. Looks fine but I'll check again now that I know what I'm looking for thanks to your post.

Post by **Drnick** » Thu Sep 06, 2018 2:54 am

Wow! Its just pressed in! Unbelievable ! Well,thats a simple fix.

Post by **JMod45** » Thu Sep 06, 2018 12:38 pm

Drnick wrote: Thu Sep 06, 2018 2:54 am Wow! Its just pressed in! Unbelievable ! Well,thats a simple fix.

My thoughts too, I think I'm going to pull off the stand and weld that pin. Then I don't have to worry about it, and they can give me a new one when my local dealership gets the part. (I don't let my local dealer touch my bike.)

Post by **Drnick** » Thu Sep 06, 2018 2:56 pm

JMod45 wrote: Thu Sep 06, 2018 12:38 pm
Drnick wrote: Thu Sep 06, 2018 2:54 am Wow! Its just pressed in! Unbelievable ! Well,thats a simple fix.
My thoughts too, I think I'm going to pull off the stand and weld that pin. Then I don't have to worry about it, and they can give me a new one when my local dealership gets the part. (I don't let my local dealer touch my bike.)

I agree 100%, dont like no one touching my toys

Post by **vcyclenut** » Thu Sep 06, 2018 3:59 pm

I pulled mine this weekend when I installed the exhaust, I will also just have the pin welded and call it a day

Post by **THOR** » Thu Sep 06, 2018 7:57 pm

i removed mine.

Post by **Champ87** » Fri Sep 07, 2018 12:46 am

Drnick wrote: Thu Sep 06, 2018 2:54 am Wow! Its just pressed in! Unbelievable ! Well,thats a simple fix.

Yes, it does seem unbelievable so I went and looked. The pin for the side stand is welded but I was surprised not to see a weld for the center stand.

But wait a minute. A quick check on the back face of the plate and there it is - some weld.

Pin for center stand spring is welded on the back face of the mount.

If I see a recall notice or the dealer contacts me then I'll take it in for sure. For now though mine looks sound so I'm not feeling any real concern.

Post by **Oyabun** » Fri Sep 07, 2018 7:58 am

I´ll use "Nural21" for reinforcement

thanks all for advice

H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Re: H2 SX/SX SE recall

Who is online