Removed internal baffles in muffler

[Drnick]

I wasn’t waiting for a decent slip on,so I decided to do a “little surgery” on the muffler can,other then the more distinctive/ aggressive sound,u can’t tell it had a “bafflectomy”!

[JonTheChron]

post a video

[Drnick]

Video? The can looks totally stock,the difference is on the inside,I did use a DB meter before and after,before at idle (1100 rpm),87 DB @ 1’ from rear tire,and after,93 DB at same distance.

[Pyrocritic]

Video? The can looks totally stock,the difference is on the inside,I did use a DB meter before and after,before at idle (1100 rpm),87 DB @ 1’ from rear tire,and after,93 DB at same distance.

Yep, videos actually have audio with them so you can hear how things sound, including exhausts.

[JMod45]

How did you take them out? From the little bit I have looked, everything is welded together.

[Drnick]

Well,I used a dermal to remove the rear part of the exhaust,once that was removed, I removed the tube that exits the exhaust and cut roughly 6-7”off,then I used a large drill
(1”) and made several holes in the middle section (bulkhead),then welded the section I cut off,re-installed end cap....it’s not loud,but it is more “noticeable”amongst the boobs I drive next to