Clutch fluid turned black

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
Jkwan0902
Accelerating

Accelerating
Posts: 109
Joined: Sun May 20, 2018 10:54 pm
Location: Connecticut
Bike(s): Ninja H2 SE
x 1

Re: Clutch fluid turned black

Post by Jkwan0902 » Sun Jun 03, 2018 11:35 pm


Confirmed, my clutch fluid is also turning black at 650 miles.
0 x

User avatar
bull_dog190
Boost Engaged

Boost Engaged
Posts: 25
Joined: Wed May 23, 2018 4:08 am
Location: Northeast Wisconsin
Bike(s): H2SX , RC51 , ZRX1200

Re: Clutch fluid turned black

Post by bull_dog190 » Mon Jun 04, 2018 9:20 am


I can also confirm. ~900miles on bike and the clutch fluid is much darker than the brake fluid.
0 x

2018 Kawasaki Ninja H2 SX - #387

2013 Kawasaki Ninja ZX10R - SOLD

2004 Kawasaki ZRX1200

2000 Honda RC51 RVT1000R

1999 Yamaha VMAX - FOR SALE

1996 CBR600 F3 -SOLD
:ugly:

User avatar
Tom2
New Member

New Member
Posts: 19
Joined: Sun May 20, 2018 1:19 pm
Location: Central Texas
Bike(s): H2 sx se

Re: Clutch fluid turned black

Post by Tom2 » Tue Jun 05, 2018 3:50 pm


Kawasaki covered the drain, flush, and refill on my clutch fluid under warranty. They said this was the first they heard of this issue.
0 x

User avatar
bull_dog190
Boost Engaged

Boost Engaged
Posts: 25
Joined: Wed May 23, 2018 4:08 am
Location: Northeast Wisconsin
Bike(s): H2SX , RC51 , ZRX1200

Re: Clutch fluid turned black

Post by bull_dog190 » Fri Jun 08, 2018 3:50 am


Tom2 wrote: Tue Jun 05, 2018 3:50 pm Kawasaki covered the drain, flush, and refill on my clutch fluid under warranty. They said this was the first they heard of this issue.
how many miles?

was it easy to get them to change it under warranty?
0 x

2018 Kawasaki Ninja H2 SX - #387

2013 Kawasaki Ninja ZX10R - SOLD

2004 Kawasaki ZRX1200

2000 Honda RC51 RVT1000R

1999 Yamaha VMAX - FOR SALE

1996 CBR600 F3 -SOLD
:ugly:

User avatar
Jkwan0902
Accelerating

Accelerating
Posts: 109
Joined: Sun May 20, 2018 10:54 pm
Location: Connecticut
Bike(s): Ninja H2 SE
x 1

Re: Clutch fluid turned black

Post by Jkwan0902 » Sun Jun 10, 2018 1:28 am


So I picked up the bike from its first service today, and I made sure I let them know about the clutch fluid. They said they will reach out to Kawi since Kawi has heard something about that before. Will update when I find out more. Also, I currently have 950 on the dash. Not quite black, but much much darker than brake fluid reservoir.
0 x

User avatar
Thunderdawg
Supercharged!

Supercharged!
Posts: 311
Joined: Fri Feb 16, 2018 2:05 am
Location: Central AZ
Bike(s): 2018 Ninja H2 SX SE
x 46
x 6

Re: Clutch fluid turned black

Post by Thunderdawg » Sun Jun 10, 2018 2:28 am


I stopped by my dealer on 7 June just after completing the 1000 mile break in to ask about the clutch master cylinder fluid dark color. After some confusion about which fluid I meant, was shown via print out from Ma Kawi that there are no warranty issues pending, not mention of clutch fluid issues. Service guy offered to change the clutch fluid and I declined at that time. I am planning to get a fluid tester and go from there. BTW, my 600 mile service did include a check of SC shaft axial play. I had to wait a few days for them to get the Kawi tool to hold the dial indicator for that test. I could have done it myself as my gunsmithing tools give me the capability. They knocked $100 off of my service bill because I had to wait for them to get the oil filter and the dial indicator tool.
0 x

Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads

User avatar
KenshiBiker
Boost Engaged

Boost Engaged
Posts: 25
Joined: Tue May 29, 2018 2:38 pm
Location: Australia
Bike(s): CB250, RF900R, H2 SX SE
x 1

Re: Clutch fluid turned black

Post by KenshiBiker » Wed Jun 20, 2018 11:47 pm


Same issue here, got it changed during the 1000km service.
They seemed surprised when I mentioned it.
0 x

User avatar
stk0308
Accelerating

Accelerating
Posts: 214
Joined: Wed Feb 14, 2018 7:37 pm
Location: St Louis
Bike(s): '01 YZ426f, '20 Tiger 900 Rally, '16 Street Triple R, '18 H2 SX SE
x 22
x 6

Re: Clutch fluid turned black

Post by stk0308 » Tue Jul 03, 2018 10:10 pm


A Facebook post postulates it's being turned black by excess heat. Not sure if I follow how that works, but it's a talking point.

And yes, mine is also noticeably darker than the brake fluid. Around 2000 miles on the bike when I noticed.
0 x

Motorcycling is not, of itself, inherently dangerous. It is, however, extremely unforgiving of inattention, ignorance, incompetence, or stupidity

User avatar
JMod45
Boost Engaged

Boost Engaged
Posts: 37
Joined: Sun May 20, 2018 12:02 am
Location: Texas

Re: Clutch fluid turned black

Post by JMod45 » Wed Jul 04, 2018 1:19 pm


Yeah, mine was getting pretty dark at 1700 miles. Not sure if I buy into the heat thing, but I'm sure the fluid for the clutch gets hotter than I fluid for the brakes. Decided to flush with DOT 5.1 yesterday. So I'll see if that makes any difference. 5.1 has a higher heat resistance and is compatible with 3 and 4 systems.

FYI, if you try this, DOT 5 is completely different and not compatible with 3, 4, or 5.1.
http://www.epicbleedsolutions.com/resou ... ake-fluid/
0 x

User avatar
Thunderdawg
Supercharged!

Supercharged!
Posts: 311
Joined: Fri Feb 16, 2018 2:05 am
Location: Central AZ
Bike(s): 2018 Ninja H2 SX SE
x 46
x 6

Re: Clutch fluid turned black

Post by Thunderdawg » Wed Jul 04, 2018 6:57 pm


The fluid in my clutch master cylinder has also turned dark as I posted a few weeks ago. Just now, I tested the fluid with an eOUTIL MT300 brake fluid tester and the fluid tested "less than 1% water content", the lowest reading the tester has. No performance issues with clutch actuation, so I will continue as is for now.
0 x

Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests