Handlebar Raisers?

[sydjustice]

Just got my kit. Spent about an hour trying carefully to remove
the left side heated grips with wd40 and compress air. I really
did not want to damage them any hint would be helpful. thanks

[esenior]

Anyone else get a kit from Spiegler? Just called to check status on my order from 6/10 and they are telling me that it is now delayed until end of July! I should have ordered from Bikermart originally, would have had the kit by now. Thinking I should cancel and wait for Murph’s. Have his risers on my 2014 and 2016 N1k. Top quality and work great.

[HaraldB]

Just got my kit. Spent about an hour trying carefully to remove
the left side heated grips with wd40 and compress air. I really
did not want to damage them any hint would be helpful. thanks

Is there anybody else removed the left side heated grips?
Any advice?
Is it somehow glued?

Thank you.
Harald

[N4speed]

Yes, I just installed the handlebar kit, to remove the left heated grip you have to apply heat with a heat gun to get the adhesive to release. I leared this the hard way and had to buy another left side heated grip. The grip is made into a sleeve, which is glued to the bar end. Don't try to separate the grip from the sleeve you will just destroy it. Cost me 120.00 comes as a assy.

[Prof J]

Anyone with photos pre and post install?

[HaraldB]

This is how it looks with demounted heated grip.

[Prof J]

Would someone please post up a few side profile photos, which would show the bar, handlebar portion height compared to the gas tank?

To anyone using this setup kit, how much 'play/slack' is left with the new brake lines/hydraulics lines installed?

[SDH2Mike]

Would someone please post up a few side profile photos, which would show the bar, handlebar portion height compared to the gas tank?

To anyone using this setup kit, how much 'play/slack' is left with the new brake lines/hydraulics lines installed?

If you go to the (Sargent seat) thread I have some pics that may help you get an idea on the ABM bars. I also sent you a pm but if the pics from my mentioned thread don’t work let me know.

[Prof J]

Would someone please post up a few side profile photos, which would show the bar, handlebar portion height compared to the gas tank?

To anyone using this setup kit, how much 'play/slack' is left with the new brake lines/hydraulics lines installed?

If you go to the (Sargent seat) thread I have some pics that may help you get an idea on the ABM bars. I also sent you a pm but if the pics from my mentioned thread don’t work let me know.

Mike, thanks. I saw that post. I've PM'd you in response. Thank you.