Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
-
DeRox
- Accelerating

- Posts: 166
- Joined: Tue Dec 12, 2017 11:45 am
- Location: Netherlands
- x 3
Post
by DeRox » Mon May 14, 2018 8:50 pm
Had the Akra fitted. It makes as much noise as the stock exhaust, i.e. none
I guess the cat has got to go for a nicer exhaust note...
Cases are fitted too. Of course without the correct color panels...

0 x
-
Rymek
- Boost Engaged

- Posts: 89
- Joined: Wed May 02, 2018 11:02 am
- Location: Poland
- Bike(s): H2 SX SE
Post
by Rymek » Mon May 14, 2018 9:05 pm
Did you get the dbkillers removed?
0 x
VZ800➠ VFR800Fi ➠ ZZR1400g1 ➠ ZZR1400g2 ➠ H2SX SE
-
cOoTeR
- Supercharged!

- Posts: 1105
- Joined: Fri Dec 15, 2017 3:40 am
- Location: United States
- x 2
Post
by cOoTeR » Mon May 14, 2018 10:02 pm
The bike is really loud without the exhaust can on there. It sounds like a race bike. When i removed my rear wheel i had to take the exhaust off so I ran it with the exhaust off to hear it.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
-
DeRox
- Accelerating

- Posts: 166
- Joined: Tue Dec 12, 2017 11:45 am
- Location: Netherlands
- x 3
Post
by DeRox » Tue May 15, 2018 6:30 am
Rymek wrote: Mon May 14, 2018 9:05 pm
Did you get the dbkillers removed?
Nope, didn't, isn't easy to do. Our finnish friend did though?
0 x
-
Rymek
- Boost Engaged

- Posts: 89
- Joined: Wed May 02, 2018 11:02 am
- Location: Poland
- Bike(s): H2 SX SE
Post
by Rymek » Tue May 15, 2018 7:08 am
I'm still waiting for my Akrap to come. It's 2-3 months waiting time here for some reason :/ But first thing i'll do will be removing DBKillers. In my ZZR1400 akrap's came with soldered dbkillers, but the service managed to remove them so i'm guessing it will be the same case here.
0 x
VZ800➠ VFR800Fi ➠ ZZR1400g1 ➠ ZZR1400g2 ➠ H2SX SE
Who is online
Users browsing this forum: Bing [Bot] and 83 guests