Finally taking my bike in for a flash and tune.
Finally taking my bike in for a flash and tune.
I'm taking my bike in for a custom tune today. I'll post my results. I should be able to compare it to my 2012 zx10r tat had a custom tune, flash, slip on and filter. I'll post up the results later today if I can.
My bike is currently stock other than sprint air filter abs PAIR block off.
My bike is currently stock other than sprint air filter abs PAIR block off.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- Drnick
- Chirp-Chirp!

- Posts: 349
- Joined: Mon Apr 23, 2018 1:52 am
- Location: Pompano beach,Florida
- Bike(s): Too many to list!
- x 3
Re: Finally taking my bike in for a flash and tune.
I assume you'll do a before and after Dyno pull?
0 x
Velocitus Eradicus
Re: Finally taking my bike in for a flash and tune.
Yeah. The before won't be exactly accurate to stock because it has the sprint filter in it. But I'm planning on getting a before and after graph and also overlay my 2012 zx10r graph for comparison. We're at around 2,400ft elevation here and it was 90°F at 9:30am. So I'm just looking for the before and after numbers.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
Re: Finally taking my bike in for a flash and tune.
At the shop.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- WR-NA
- Accelerating

- Posts: 104
- Joined: Thu Mar 15, 2018 11:09 pm
- Bike(s): 2009 ZX6R (Race), 2011 ZX10R, 2016 ZX10R, 2017 Z125 Pro, 2018 Ninja 400 (Race), 2019 H2, 2020 Z H2
- x 2
Re: Finally taking my bike in for a flash and tune.
Say hi to Phil and Evan! I didn't know you lived in (near) Tucson? I lived there for ~10 years stationed at DMAFB, lived up in Oro Valley. We'll be moving back this fall and setting up shop out there, still between going back to Tucson (Oro Valley) or moving closer to Phoenix (Maricopa).
Good luck with the tune, you're in good hands! They are the only guys besides myself and maybe one other person I would trust coming within 10 feet of my bike with a screwdriver.
Good luck with the tune, you're in good hands! They are the only guys besides myself and maybe one other person I would trust coming within 10 feet of my bike with a screwdriver.
0 x
Re: Finally taking my bike in for a flash and tune.
Lol. Yeah I've been coming to them since 2012. They're great guys. I'm hanging out with Evan right now in the dyno room. We're using woolich right now. Do you have any advice on clearing the TC, kebc, QS codes that pop up when the h2 sx is run on the dyno?WR-NA wrote: Tue May 08, 2018 5:42 pm Say hi to Phil and Evan! I didn't know you lived in (near) Tucson? I lived there for ~10 years stationed at DMAFB, lived up in Oro Valley. We'll be moving back this fall and setting up shop out there, still between going back to Tucson (Oro Valley) or moving closer to Phoenix (Maricopa).
Good luck with the tune, you're in good hands! They are the only guys besides myself and maybe one other person I would trust coming within 10 feet of my bike with a screwdriver.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
Re: Finally taking my bike in for a flash and tune.
The baseline is 164hp and 84ft.lbs.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- WR-NA
- Accelerating

- Posts: 104
- Joined: Thu Mar 15, 2018 11:09 pm
- Bike(s): 2009 ZX6R (Race), 2011 ZX10R, 2016 ZX10R, 2017 Z125 Pro, 2018 Ninja 400 (Race), 2019 H2, 2020 Z H2
- x 2
Re: Finally taking my bike in for a flash and tune.
Codes need to be cleared through diagnostics which can only be done via on bike flashing harness (there is a KDS --> OBD II harness available for bench flashing). Key on, click diagnostics, let the software populate codes, clear them with the button and follow on screen prompts. Side effect of having TC and all the other electronic aids (nuisances).
Anthony
Anthony
0 x
- Drnick
- Chirp-Chirp!

- Posts: 349
- Joined: Mon Apr 23, 2018 1:52 am
- Location: Pompano beach,Florida
- Bike(s): Too many to list!
- x 3
Re: Finally taking my bike in for a flash and tune.
Arizona & 2400 ',should be interesting what u can squeeze out of that after reflash 
0 x
Velocitus Eradicus
Who is online
Users browsing this forum: Bing [Bot] and 11 guests


