2024 zh2 project

Discuss the Z H2, the supercharged flagship model of the Kawasaki Z line of naked motorcycles.
User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

2024 zh2 project

Post by Snakes709 » Thu Aug 07, 2025 9:00 pm


Picked up a 2024 ZH2 SE with 6700km’s on it for $5000 canadian. The kicker, it has a small hold in the block in cylinder 3. Not quite sure what im gonna do with it at the moment. Guess it depends how damaged the motor is. It has a few good mods on it.

EC intercooler (previous only messed the install up)
Brocks full pentacarbon exhaust
Brocks steering damper (needs service badly)
Tst integrated tail light
Turbosmart bov
Catch can (cant remember the brand)

So if the damage is limited to the bottom end, which i doubt it is because i can see one intake valve jacked up from the throttle body mount. I will either rebuild and turn it into a track bike or flip it. If the complete motor is messed up the. Im gonna part it out. In the mean time, i need the templates from EC so i can install the intercooler on my wifes bike. Got everything unhooked and ready to drop the motor which ill do probably tomorrow. And then ill open it up. The tricky part is dealing with the ecu. It has a bt moto tune on it and i want the ecu back to stock. I should be able to overwrite it with my woolich set up but i dont have the stock bin file. Hopefully i cam just copy my wifes stock tune and load it up.
1 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: 2024 zh2 project

Post by Snakes709 » Thu Aug 07, 2025 9:01 pm


This site really hates me upload pics
Attachments
IMG_1954.jpeg
IMG_1965.jpeg
IMG_1966.jpeg
IMG_1964.jpeg
IMG_1967.jpeg
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: 2024 zh2 project

Post by Snakes709 » Thu Aug 07, 2025 9:03 pm


And more
Attachments
IMG_1976.jpeg
IMG_1966.jpeg
IMG_1946.jpeg
IMG_1945.jpeg
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
H2SXadmin
Site Admin

Site Admin
Posts: 131
Joined: Thu Nov 30, 2017 4:56 am
Location: USA
Bike(s): 2018 H2SXSE
x 81
x 80

Re: 2024 zh2 project

Post by H2SXadmin » Thu Aug 07, 2025 11:09 pm


Snakes709 wrote: Thu Aug 07, 2025 9:01 pmThis site really hates me upload pics
Don't take it personally. The site just hates your iPhone 14. Stuff like that annoys me too so I've fixed the thumbnails so their orientation matches the full sizes images. You may need to refresh the page or clear the cache to show the new thumbnails.
1 x

User avatar
Champ87
Supercharged!

Supercharged!
Posts: 1289
Joined: Mon Apr 09, 2018 1:43 am
Location: NW Indiana US
Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
x 304
x 554

Re: 2024 zh2 project

Post by Champ87 » Thu Aug 07, 2025 11:53 pm


Snakes709 wrote: Thu Aug 07, 2025 9:00 pm Picked up a 2024 ZH2 SE with 6700km’s on it for $5000 canadian. The kicker, it has a small hold in the block in cylinder 3. Not quite sure what im gonna do with it at the moment. Guess it depends how damaged the motor is. It has a few good mods on it.
Initial guess is that the piston has hit a valve and bent or broken a rod causing it to punch through the case in a bid for freedom.

Even so, $5,000 canadian seems like a good deal. You obviously agree or you wouldn't have bought it. Shame about the messed up install on the EC intercooler. Looking at your pics, that looks fixable and you have a stack of other good parts for your $5K.

Snakes709 wrote: Thu Aug 07, 2025 9:00 pmThe tricky part is dealing with the ecu. It has a bt moto tune on it and i want the ecu back to stock. I should be able to overwrite it with my woolich set up but i dont have the stock bin file. Hopefully i cam just copy my wife's stock tune and load it up.
WRT software only lists 1 bin file for US/Canada so you should be good to go once you buy another Bin File Definition Key from Woolich for that ECU.

I don't know if the BT Moto tune can be read or if they use something similar to TuneLock to prevent it being read. I know you want to overwrite it anyway but if you say you're not curious, I won't believe you. Bent valves and broken rods point to over-revving so it'd be interesting to see where the rev limit was set if you can read the data before you load a stock tune.

Looking at the pics of the latest bike really highlight how much better your wife's bike looks with the purple frame. When you first said you were going to do that, I didn't get it but the results were good. The purple looks sweet.

I'm sure this project is going to give us some interesting posts :thumbs:
0 x

Champ87
It's amazing how fast you can go when you take your time.

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: 2024 zh2 project

Post by Snakes709 » Fri Aug 08, 2025 12:58 am


Champ87 wrote: Thu Aug 07, 2025 11:53 pm
Snakes709 wrote: Thu Aug 07, 2025 9:00 pm Picked up a 2024 ZH2 SE with 6700km’s on it for $5000 canadian. The kicker, it has a small hold in the block in cylinder 3. Not quite sure what im gonna do with it at the moment. Guess it depends how damaged the motor is. It has a few good mods on it.
Initial guess is that the piston has hit a valve and bent or broken a rod causing it to punch through the case in a bid for freedom.

Even so, $5,000 canadian seems like a good deal. You obviously agree or you wouldn't have bought it. Shame about the messed up install on the EC intercooler. Looking at your pics, that looks fixable and you have a stack of other good parts for your $5K.

Snakes709 wrote: Thu Aug 07, 2025 9:00 pmThe tricky part is dealing with the ecu. It has a bt moto tune on it and i want the ecu back to stock. I should be able to overwrite it with my woolich set up but i dont have the stock bin file. Hopefully i cam just copy my wife's stock tune and load it up.
WRT software only lists 1 bin file for US/Canada so you should be good to go once you buy another Bin File Definition Key from Woolich for that ECU.

I don't know if the BT Moto tune can be read or if they use something similar to TuneLock to prevent it being read. I know you want to overwrite it anyway but if you say you're not curious, I won't believe you. Bent valves and broken rods point to over-revving so it'd be interesting to see where the rev limit was set if you can read the data before you load a stock tune.

Looking at the pics of the latest bike really highlight how much better your wife's bike looks with the purple frame. When you first said you were going to do that, I didn't get it but the results were good. The purple looks sweet.

I'm sure this project is going to give us some interesting posts :thumbs:

Thats my guess as well. Motor is ready to drop and ill dig in and see the carnage but there is at least one valve gone. Im praying the head isnt toast but my guess is there is some damage.

I am curious what the bt tune looks as i know a few guys personally that have melted their plugs and pistons with bt moto tune so i wanna see what the timing and afr is. But they did tell me its locked so even if i can get access to the ecu, i wont be able to read their tune. Not quite sure i can blame them on this failure though. Lots of signs that this bike was wheelied alot and we all know how the engine gets oil starvation if on the back wheel to long. Plus the shop said there was supercharger gears but the stock ones were put back.

As for the intercooler, i got all that jb weld off. I would prefer to start fresh so if i can get the template from EC one where to drill the holes, ill drill out the plenum on the wifes bike as i see one of the holes are not perfectly round on this plenum.

There is no doubt in my mind that i can make a profit by parting out. Its just how long will that take? Intercooler, brocks exhaust and frame is enough to make it worth it

And yea, the wifes bike came out nice and she still wants to do more. Maybe purple rims but not sure if that will be to much purple. Recently added a hyperpro rear shock on it and went to Laguna Seca for anothwr track day. The zh2 is such a fun bike on the track.
Attachments
IMG_1776.jpeg
1 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: 2024 zh2 project

Post by Snakes709 » Fri Aug 08, 2025 2:28 am


Got the motor out this evening. Having 2 extra people makes it alot easier getting it out and on a dolly
Attachments
IMG_1980.jpeg
IMG_1979.jpeg
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: 2024 zh2 project

Post by Snakes709 » Fri Aug 08, 2025 4:27 pm


#3 piston and valve left the chat. This is now a part out bike.
Attachments
IMG_1982.jpeg
IMG_1983.jpeg
IMG_1981.jpeg
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Champ87
Supercharged!

Supercharged!
Posts: 1289
Joined: Mon Apr 09, 2018 1:43 am
Location: NW Indiana US
Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
x 304
x 554

Re: 2024 zh2 project

Post by Champ87 » Fri Aug 08, 2025 5:01 pm


Ouch! :eek:

I can only guess that some broken bits of piston/rod got into the balancer to crack the balancer cover like that.
0 x

Champ87
It's amazing how fast you can go when you take your time.

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: 2024 zh2 project

Post by Snakes709 » Fri Aug 08, 2025 5:58 pm


Champ87 wrote: Fri Aug 08, 2025 5:01 pm Ouch! :eek:

I can only guess that some broken bits of piston/rod got into the balancer to crack the balancer cover like that.
Got the supercharger off and there was pieces of piston snd rod up on the clutch basket and supercharger chain.

Supercharger seems to be completely undamaged which is a bonus.

Im hoping but very doubtful that the transmission is good to go. Wanna sell as much as this as possible.
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests