2023 Ninja H2 SX Performance Mods Help/Suggestions
- Eeyy
- Supercharged!

- Posts: 74
- Joined: Thu Dec 14, 2023 8:42 am
- Location: Pennsylvania
- Bike(s): 2023 H2 SX SE / 2005 Honda XR650R
- x 129
- x 16
2023 Ninja H2 SX Performance Mods Help/Suggestions
I picked up a 23' two weeks before I went on a military deployment for 2 years, so I figure by the time I get home, tunes and more parts will be available so I wanted to get a list together of potential mods I should do to it when I get home. Any ideas for mods or parts for older models would be just fine to work with as I am sure there'll be updated versions 2 years from now.
The end goal is to get the bike as fast as possible without degrading engine life (too much) or stretching the bike.
I wanted to get the biked tuned and unrestricted, with a full exhaust and PAIR blocker plates at a minimum. I am wary of the idea of the see-through sprint filters and have heard many bad things about them. I don't doubt there'll be hp gains there, but that's too much risk for me. I will probably stick with stock filters with everything I know as of right now. I am unsure of which exhaust to go with.
I've seen a couple h2 sx's with H2R cams, but I don't know or really understand anything about that or it's worth it. pros/cons. Anyone who's done that or has information would be great.
Also looking for suggestions for any other performance mods. Thank you.
The end goal is to get the bike as fast as possible without degrading engine life (too much) or stretching the bike.
I wanted to get the biked tuned and unrestricted, with a full exhaust and PAIR blocker plates at a minimum. I am wary of the idea of the see-through sprint filters and have heard many bad things about them. I don't doubt there'll be hp gains there, but that's too much risk for me. I will probably stick with stock filters with everything I know as of right now. I am unsure of which exhaust to go with.
I've seen a couple h2 sx's with H2R cams, but I don't know or really understand anything about that or it's worth it. pros/cons. Anyone who's done that or has information would be great.
Also looking for suggestions for any other performance mods. Thank you.
0 x
- jnmann
- Boost Engaged

- Posts: 79
- Joined: Sat Aug 12, 2023 12:08 am
- Location: Texas
- Bike(s): 2023 H2 SX SE
- x 6
- x 42
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
Once SLR tuning gets their act together and releases their handheld flasher we will see what kind of gains can be made. I put a full Vandemon system on mine and am thinking about adding an intercooler. I think the general consensus is to try and stay around 240 hp unless you want to start tearing apart the engine and rebuilding it with H2R parts. The SX SE is not built the same as the H2R and can’t handle the 300+ hp you see with those bikes. If you browse around forums you’ll read about how people have blown their engines trying to squeeze hp out of their engines
2 x
2023 H2 SX SE
2017 Ninja 300
- Vex
- Supercharged!

- Posts: 1505
- Joined: Sun Sep 08, 2019 5:19 pm
- Location: Washington
- Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
- x 381
- x 417
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
Mines been up around 285, but it's been tuned back down to 255 for a little more longevity. Stick to stage 2 gears. Stage 3 is where things start to explode so that's where you'd start swapping out engine parts. You absolutely need an intercooler; even stock can benefit from it.
1 x
2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp
- Eeyy
- Supercharged!

- Posts: 74
- Joined: Thu Dec 14, 2023 8:42 am
- Location: Pennsylvania
- Bike(s): 2023 H2 SX SE / 2005 Honda XR650R
- x 129
- x 16
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
So, stage 1 gears and an intercooler should be totally fine for engine longevity? What intercooler would you recommend?Vex wrote: Fri Mar 15, 2024 10:12 pm Mines been up around 285, but it's been tuned back down to 255 for a little more longevity. Stick to stage 2 gears. Stage 3 is where things start to explode so that's where you'd start swapping out engine parts. You absolutely need an intercooler; even stock can benefit from it.
0 x
- Eeyy
- Supercharged!

- Posts: 74
- Joined: Thu Dec 14, 2023 8:42 am
- Location: Pennsylvania
- Bike(s): 2023 H2 SX SE / 2005 Honda XR650R
- x 129
- x 16
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
I had no idea about intercoolers on these bikes until now, thank you. I think I'll probably add one and consider a slight regear of the supercharger.jnmann wrote: Fri Mar 15, 2024 8:21 pm Once SLR tuning gets their act together and releases their handheld flasher we will see what kind of gains can be made. I put a full Vandemon system on mine and am thinking about adding an intercooler. I think the general consensus is to try and stay around 240 hp unless you want to start tearing apart the engine and rebuilding it with H2R parts. The SX SE is not built the same as the H2R and can’t handle the 300+ hp you see with those bikes. If you browse around forums you’ll read about how people have blown their engines trying to squeeze hp out of their engines
0 x
- Vex
- Supercharged!

- Posts: 1505
- Joined: Sun Sep 08, 2019 5:19 pm
- Location: Washington
- Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
- x 381
- x 417
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
Yea, I wouldn't worry much about stage 1, with proper maintenance. Just make sure to keep checking your impeller and chains, etc. I didn't have the intercooler while I was on stage 1 gears. If I could go back, I would get that first over anything.Eeyy wrote: Sat Mar 16, 2024 1:27 am So, stage 1 gears and an intercooler should be totally fine for engine longevity? What intercooler would you recommend?
There are two popular intercoolers: Extreme Creations and Yagerwerx.
Extreme Creations:
There used to be an airflow cap with the EC intercooler, and it would cap out, not able to suck any more air through. They may have fixed that problem in a newer revision. They are also way more expensive, but look more "finished."
Yagerwerx:
Yagerwerx IC's are made by Travis Yager, who is honestly one of the world's experts on the H2 platforms. You send him the top, and he welds in the components and sends the rest to you for install. Or if you are in/near Florida, you can probably take it to him for modding. His IC is cheaper then Extreme Creations, but it doesn't have the same finished look. It's purpose built to slay.
He's had H2's shipped to him from all over the world for modification. He used to work with Boomstune, who had some of the fastest H2/SX's in the world. Boomstune is the one that warned me against stage 3 without some more serious and costly upgrades. We also consulted him the tuning for my bike when we were dialing it in for stage 2.
2 x
2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp
- Eeyy
- Supercharged!

- Posts: 74
- Joined: Thu Dec 14, 2023 8:42 am
- Location: Pennsylvania
- Bike(s): 2023 H2 SX SE / 2005 Honda XR650R
- x 129
- x 16
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
Thank you so much for all of this information. I reached out to werx, definitely going with an intercooler whether I regear the supercharger or not. My last bike I had 80k miles on before a friend strongarmed me into selling it to him, so I'd love to get this bike to at least 100k before I really have to tear the engine open.Vex wrote: Sat Mar 16, 2024 4:46 pmYea, I wouldn't worry much about stage 1, with proper maintenance. Just make sure to keep checking your impeller and chains, etc. I didn't have the intercooler while I was on stage 1 gears. If I could go back, I would get that first over anything.Eeyy wrote: Sat Mar 16, 2024 1:27 am So, stage 1 gears and an intercooler should be totally fine for engine longevity? What intercooler would you recommend?
There are two popular intercoolers: Extreme Creations and Yagerwerx.
Extreme Creations:
There used to be an airflow cap with the EC intercooler, and it would cap out, not able to suck any more air through. They may have fixed that problem in a newer revision. They are also way more expensive, but look more "finished."
Yagerwerx:
Yagerwerx IC's are made by Travis Yager, who is honestly one of the world's experts on the H2 platforms. You send him the top, and he welds in the components and sends the rest to you for install. Or if you are in/near Florida, you can probably take it to him for modding. His IC is cheaper then Extreme Creations, but it doesn't have the same finished look. It's purpose built to slay.
He's had H2's shipped to him from all over the world for modification. He used to work with Boomstune, who had some of the fastest H2/SX's in the world. Boomstune is the one that warned me against stage 3 without some more serious and costly upgrades. We also consulted him the tuning for my bike when we were dialing it in for stage 2.
0 x
- Eeyy
- Supercharged!

- Posts: 74
- Joined: Thu Dec 14, 2023 8:42 am
- Location: Pennsylvania
- Bike(s): 2023 H2 SX SE / 2005 Honda XR650R
- x 129
- x 16
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
Is that 240 wheel hp?jnmann wrote: Fri Mar 15, 2024 8:21 pm Once SLR tuning gets their act together and releases their handheld flasher we will see what kind of gains can be made. I put a full Vandemon system on mine and am thinking about adding an intercooler. I think the general consensus is to try and stay around 240 hp unless you want to start tearing apart the engine and rebuilding it with H2R parts. The SX SE is not built the same as the H2R and can’t handle the 300+ hp you see with those bikes. If you browse around forums you’ll read about how people have blown their engines trying to squeeze hp out of their engines
0 x
- Eeyy
- Supercharged!

- Posts: 74
- Joined: Thu Dec 14, 2023 8:42 am
- Location: Pennsylvania
- Bike(s): 2023 H2 SX SE / 2005 Honda XR650R
- x 129
- x 16
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
I was talking to Yagerwerks about having him do work to my bike. He was saying how he could probably do 280whp with stage 2, intercooler, clutch springs, and exhaust without compromising longevity. I was wondering what your take on that would be? The last thing I want is to have my bike blow up.Vex wrote: Fri Mar 15, 2024 10:12 pm Mines been up around 285, but it's been tuned back down to 255 for a little more longevity. Stick to stage 2 gears. Stage 3 is where things start to explode so that's where you'd start swapping out engine parts. You absolutely need an intercooler; even stock can benefit from it.
0 x
- Snakes709
- Supercharged!

- Posts: 1399
- Joined: Sun Aug 19, 2018 2:42 am
- Location: Edmonton, AB
- Bike(s): 2018 H2 SX SE
- x 11
- x 394
Re: 2023 Ninja H2 SX Performance Mods Help/Suggestions
You have to be prepared for that to happen. If you are worried about the motor, leave it alone or at the very least, bolt ons and a flash. Travis is amazing and im sure the bike would run flawlessly but things break that are out of anyones control. It also depends how you ride and maintain your bike. If you plan on throwing 100+whp at your engine, you need to maintain it more, shorter intervals between oil changes, valve clearance, supercharger checks.Eeyy wrote: Wed Mar 20, 2024 2:25 amI was talking to Yagerwerks about having him do work to my bike. He was saying how he could probably do 280whp with stage 2, intercooler, clutch springs, and exhaust without compromising longevity. I was wondering what your take on that would be? The last thing I want is to have my bike blow up.Vex wrote: Fri Mar 15, 2024 10:12 pm Mines been up around 285, but it's been tuned back down to 255 for a little more longevity. Stick to stage 2 gears. Stage 3 is where things start to explode so that's where you'd start swapping out engine parts. You absolutely need an intercooler; even stock can benefit from it.
4 x
2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 13 guests
