With no H2 SX Service Manual available yet, I have pulled the torque settings for the Ninja H2. I was simply going to post the relevant pages from the manual but thought there could be some copyright issues (even though the manual is available elsewhere). Instead I put together a table of torque values pulled from the H2 Service Manual for those who care about such things (as I do).
Disclaimer: keep in mind these are values for the H2. Please use some intelligence to decide which ones are appropriate for the H2 SX.
Edit: Torque Settings Table removed. Please refer to the Service Manual for your version of the H2 SX.
Torque Settings
-
Champ87
- Supercharged!
- Posts: 1287
- Joined: Mon Apr 09, 2018 1:43 am
- Location: NW Indiana US
- Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
- x 301
- x 552
Torque Settings
Last edited by Champ87 on Mon May 07, 2018 3:23 pm, edited 1 time in total.
1 x
Champ87
It's amazing how fast you can go when you take your time.
-
Champ87
- Supercharged!
- Posts: 1287
- Joined: Mon Apr 09, 2018 1:43 am
- Location: NW Indiana US
- Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
- x 301
- x 552
Re: Torque Settings
Attached is a zip file containing a new table with torques settings for H2 SX. Values are taken from service manual but are formatted into "workshop format". That means it's been laid out and formatted to be printed and laminated as a handy reference.
Table removed as it has not been updated for newer models. Please refer to the Service Manual for your particular year/model.
Table removed as it has not been updated for newer models. Please refer to the Service Manual for your particular year/model.
Last edited by Champ87 on Sat Aug 21, 2021 6:37 pm, edited 1 time in total.
0 x
Champ87
It's amazing how fast you can go when you take your time.
-
Champ87
- Supercharged!
- Posts: 1287
- Joined: Mon Apr 09, 2018 1:43 am
- Location: NW Indiana US
- Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
- x 301
- x 552
Re: Torque Settings
Not encrytpted. The pdf file is contained in a zip file so if you don't have winzip or similar then you won't be able to extract the file. Not much I can do about that as the site doesn't allow direct attachment of pdf.
I know that I will have to use my Dropbox account if I want to post larger files but this one is within the attachment size limit. Right now the file has been downloaded 11 times. If anyone else is having problems please let me know.
0 x
Champ87
It's amazing how fast you can go when you take your time.
Re: Torque Settings
Worked for me.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
-
JonTheChron
- Supercharged!
- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Re: Torque Settings
Hi please correct torque spec for the front caliper mounting bolts from thebstated 226ftlb to 26ftlb.
Thanks
Thanks
1 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
-
Champ87
- Supercharged!
- Posts: 1287
- Joined: Mon Apr 09, 2018 1:43 am
- Location: NW Indiana US
- Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
- x 301
- x 552
Re: Torque Settings
Well spotted. That was copied from the Brakes section of the service manual where it says 2 26. Obviously wrong and I didn't spot it.
I'll correct it now. Thanks
I'll correct it now. Thanks
1 x
Champ87
It's amazing how fast you can go when you take your time.
Who is online
Users browsing this forum: No registered users and 49 guests
