did anything drag, most worried about the center stand. I pulled my peg feelers already
Max lean
Re: Max lean
0 x
- JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Re: Max lean
Both pegs dragged (feelers were removed)vcyclenut wrote: Thu Jul 19, 2018 11:23 amdid anything drag, most worried about the center stand. I pulled my peg feelers already
Center stand dragged many times after L-53 degrees.
Lower fairing would drag after R-57
Pictures to come.
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
Re: Max lean
JonTheChron wrote: Thu Jul 19, 2018 4:09 pmBoth pegs dragged (feelers were removed)vcyclenut wrote: Thu Jul 19, 2018 11:23 amdid anything drag, most worried about the center stand. I pulled my peg feelers already
Center stand dragged many times after L-53 degrees.
Lower fairing would drag after R-57
Pictures to come.
Are you hanging off the side of the bike?
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Re: Max lean
As much as I can, yes.
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
- GreenHornet
- New Member

- Posts: 6
- Joined: Tue Jun 12, 2018 2:05 am
- Location: Arkansas
- Bike(s): H2SXSE
Re: Max lean
At 52degrees everything started dragging. The peg feelers and the outside of my fat foot. 
0 x
- dan_h2sx
- Boost Engaged

- Posts: 66
- Joined: Wed Oct 17, 2018 10:08 am
- Location: Munich, Germany
- Bike(s): 2015 Yamaha MT09, 2018 Kawasaki Ninja H2SXSE
- x 6
- x 6
Re: Max lean
Got to 51 left and right in the alps, but I regularly reset it to see my current lean angle 
On average I'm between 43-47 ;-)
On average I'm between 43-47 ;-)
0 x
High lean & high speed!
- Strayaknt
- New Member

- Posts: 6
- Joined: Sun Jun 06, 2021 12:44 pm
- Location: Australia
- Bike(s): H2, H2SX, ZX14RSE
- x 4
- x 3
Re: Max lean
I just broke 42 degrees and am stoked with that after I bought it three weeks ago......
In the middle of winter.
I'll be back.
In the middle of winter.
I'll be back.
0 x
- JaseG
- Boost Engaged

- Posts: 82
- Joined: Thu Jul 02, 2020 7:56 pm
- Location: East Yorkshire
- Bike(s): H2 SX SE+ ('20) / S1000R ('17)
- x 15
- x 27
Re: Max lean
I have had 78 degrees on the left. But the bike is damn heavy to lift up again, so will be more careful when putting my foot down.
3 x
- prettybirdSE
- Supercharged!

- Posts: 1149
- Joined: Sat Aug 15, 2020 7:30 pm
- Location: Montana
- Bike(s): 2020 Ninja H2SXSE+
- x 537
- x 145
Re: Max lean
49/48 respectively.Color bar all the way in the red.Haven't hit anything yet.Maybe the ouside of my shoes.
0 x
- joeshmoe1
- New Member

- Posts: 9
- Joined: Sun May 16, 2021 4:44 am
- Location: Vancouver, BC
- Bike(s): 2020 H2SXSE+, 2019 Tuono RF, 2006 K1200S
- x 1
- x 7
Re: Max lean
42 L (hairpin), 45 R (@140 kmh on sweeper). It feels like it could do a lot more, just so planted. The stability made it feel more reassuring than my Tuono, even though the Tuono is more nimble.
0 x
Who is online
Users browsing this forum: No registered users and 80 guests

