Center stand
- Thunderdawg
- Supercharged!

- Posts: 311
- Joined: Fri Feb 16, 2018 2:05 am
- Location: Central AZ
- Bike(s): 2018 Ninja H2 SX SE
- x 46
- x 6
Center stand
If someone else started a thread on this, my apologies. I put my SE up on the center stand recently and was pleasantly surprised how easy it is to use. Both up and down were very easy. My recent experience base is a pair for Triumph Sprint STs since 2001. And the Sprint is about 100 lbs lighter than the SE.
0 x
Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads
Re: Center stand
It was definetly easier than my concours
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Re: Center stand
It is amazingly easy to use, I used mine for the first time yesterday.
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
- stk0308
- Accelerating

- Posts: 214
- Joined: Wed Feb 14, 2018 7:37 pm
- Location: St Louis
- Bike(s): '01 YZ426f, '20 Tiger 900 Rally, '16 Street Triple R, '18 H2 SX SE
- x 22
- x 6
Re: Center stand
When I tried it out at the Chicago IMS show I was also quite impressed with it. I actually commented out loud "Well, they got that geometry right!"
0 x
Motorcycling is not, of itself, inherently dangerous. It is, however, extremely unforgiving of inattention, ignorance, incompetence, or stupidity
Re: Center stand
I agree with Cooter 100%. My C14 was much harder to get up on the stand. This thing is easy.
Now the next question is why does the side stand keep the bike too vertical? It should be over a bit more.
Now the next question is why does the side stand keep the bike too vertical? It should be over a bit more.
0 x
1980 CB650 Sold to an older guy in CT to "tinker" with.
2007 Bandit 1250 Traded in for the 2012 C14.
2012 Concours 14 Traded in for the 2015 C14.
2015 Concours 14 Traded in for the SX SE.
2018 H2 SX SE. Traded in for the SX SE+
2021 H2 SX SE+
Re: Center stand
My issue with the side stand is the post that sticks out the side of the kickstand is too far forward and to short. I hope I get used to its position.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
Re: Center stand
I'm finding the side stand easier and easier each day. Just have to get used to it. Having it stand the bike up too vertical is going to bite me in the ass. I'm afraid I'm going to walk away and it's going to fall right over.
0 x
1980 CB650 Sold to an older guy in CT to "tinker" with.
2007 Bandit 1250 Traded in for the 2012 C14.
2012 Concours 14 Traded in for the 2015 C14.
2015 Concours 14 Traded in for the SX SE.
2018 H2 SX SE. Traded in for the SX SE+
2021 H2 SX SE+
Re: Center stand
the sidestand is a piece of cake compared to my Ducati, lol
The other super nice thing about the center stand is it does not use the exhaust as a stop. It has its own bracket.
This should greatly expand available exhausts you could use while keeping the very nice feature
The other super nice thing about the center stand is it does not use the exhaust as a stop. It has its own bracket.
This should greatly expand available exhausts you could use while keeping the very nice feature
0 x
Re: Center stand
Love the centerstand. you almost don't have to pull up on the bike to get it up, just step down firmly and it pops right up. the sidestand is a little tricky though, at least at first.
0 x
- Jkwan0902
- Accelerating

- Posts: 109
- Joined: Sun May 20, 2018 10:54 pm
- Location: Connecticut
- Bike(s): Ninja H2 SE
- x 1
Re: Center stand
I love the centerstand and the ease of use, but I've only used it a handful of times and it's already starting to rust. If the corrosion continues, I'd be a little afraid to use it. Anybody else notice this problem?
0 x
Who is online
Users browsing this forum: No registered users and 27 guests


