H2 SX Build Date
- gremlin
- New Member

- Posts: 16
- Joined: Mon Apr 02, 2018 12:27 am
- Location: maryland
- Bike(s): zx14R
- x 1
H2 SX Build Date
A Kawasaki representative at the recent Daytona Florida demo ride event (no H2SXs were available for test rides) told me that the H2SX was delayed for delivery because of one electrical component issue. The original planned release schedule to dealers was 25% in January, 25% in February, and 50% in March. As we now know, dealers didn't start receiving H2SXs until mid-late March, and many still don't have them. The build date is on the trellis frame, on the same tag as the VIN, stated as MM/YY (example: 01/18), meaning the bike started down the assembly line sometime in January of 2018. It will be interesting to see if our machines were produced months ago (October/November timeframe) and held to replace a component, or production started later (January/February) once the component was fixed. It normally only takes about 4-5 weeks from rolling of the assembly line, to arriving at our dealer.
Please list last 3-4 digits of your VIN, and your build date, and lets see what we find.
Please list last 3-4 digits of your VIN, and your build date, and lets see what we find.
0 x
Re: H2 SX Build Date
My build date is 2/18 360
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Re: H2 SX Build Date
360? The local h2sx sitting on the dealership floor also has VIN #360
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
- JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Re: H2 SX Build Date
VIN 232 02/18
Last edited by JonTheChron on Mon Apr 02, 2018 7:26 am, edited 1 time in total.
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
Re: H2 SX Build Date
Label in the crate:

Serial number 250
Does it means that prod date 01/18?
Serial number 250
Does it means that prod date 01/18?
0 x
H2SX SE with panniers and Vandemon H2R (+Akrapovic)
Ex: ZZR-1400 -12
Ex: Suzuki Hayabusa -08
Ex: Kawasaki Z750 -04
- gremlin
- New Member

- Posts: 16
- Joined: Mon Apr 02, 2018 12:27 am
- Location: maryland
- Bike(s): zx14R
- x 1
Re: H2 SX Build Date
Vmatti: Thank you for responding. The build date is not listed on the shipping crate. It is instead stamped on a small plate or sticker, usually attached to the frame or steering head. For the H2SX, the build date is listed on a small sticker attached to the Trellis frame, on the left side of the bike, right under the fuel tank. Your frame number is 250, meaning your bike was #250 of the green H2 SXSE bikes to come down the assembly line. Your engine number is 4439. This tells me two things: 1: Kawasaki is listing H2 SX SE (green) frame numbers separately from H2 SX (grey). 2: The engine numbers are combined between the green (SE) bikes, and the non SE (grey) bikes. Please let us know your build date when you have a chance to check.
0 x
Re: H2 SX Build Date
My bike is still at my dealer, but I'll check it the next time when visiting over there.
What does number series 8-01-612 tells ?
What does number series 8-01-612 tells ?
0 x
H2SX SE with panniers and Vandemon H2R (+Akrapovic)
Ex: ZZR-1400 -12
Ex: Suzuki Hayabusa -08
Ex: Kawasaki Z750 -04
- Pioneer
- New Member

- Posts: 5
- Joined: Tue Mar 20, 2018 8:34 pm
- Location: Victoria Australia
- Bike(s): H2 SX SE
Re: H2 SX Build Date
This is the info I have on mine if someone can interpret them
Model ZX1002BJF
FRAME JKBZXVB17JA000195
ENGINE ZXT00NE006073
Pioneer
Model ZX1002BJF
FRAME JKBZXVB17JA000195
ENGINE ZXT00NE006073
Pioneer
0 x
- Thunderdawg
- Supercharged!

- Posts: 311
- Joined: Fri Feb 16, 2018 2:05 am
- Location: Central AZ
- Bike(s): 2018 Ninja H2 SX SE
- x 46
- x 6
Re: H2 SX Build Date
My bike's VIN is 539 and build date is 02/18.
0 x
Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads
Who is online
Users browsing this forum: Bing [Bot] and 44 guests


