Aftermarket levers?

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
Pyrocritic
Pressure Building
Pressure Building
Posts: 93
Joined: Dec 20th, 2017
x 13
x 51

Re: Aftermarket levers?

Post by Pyrocritic » Mon Apr 22, 2019 11:06 pm


has anyone found ANY aftermarket levers for the SX? :wtf:
1 x

User avatar
TallNinja
Boost Engaged
Boost Engaged
Posts: 21
Joined: Mar 5th, 2019
Location: Manitoba
Bike(s): 1979 CB750, XSR900
x 31
x 3

Re: Aftermarket levers?

Post by TallNinja » Fri Apr 26, 2019 3:06 pm


Pyrocritic wrote:
Mon Apr 22, 2019 11:06 pm
has anyone found ANY aftermarket levers for the SX? :wtf:
I've been checking this thread every day, hoping to find some shorty levers.
0 x

User avatar
darich1146
Starting Engine
Starting Engine
Posts: 9
Joined: Apr 2nd, 2019
Location: Mesa, AZ
Bike(s): 2018 H2 SX SE
x 32

Re: Aftermarket levers?

Post by darich1146 » Fri Apr 26, 2019 8:17 pm


I wrote to ASV and got this back a couple days ago. Kind of bummed but I'll keep hoping.


I've used your levers in the past and have found them to be fantastic. I recently purchased a new bike and I'm looking to put some new levers on it. I bought a 2018 Kawasaki H2 SX SE. I saw on the bike finder that you had H2. Would it be the same for my model? If not, do you have levers that fit?

Hi David,

It appears to be different so as of right now I do not have a date on when we will have them available unfortunately

Vince Le
Sales & Support
0 x

User avatar
TallNinja
Boost Engaged
Boost Engaged
Posts: 21
Joined: Mar 5th, 2019
Location: Manitoba
Bike(s): 1979 CB750, XSR900
x 31
x 3

Re: Aftermarket levers?

Post by TallNinja » Sat Apr 27, 2019 3:01 am


Anyone have a zx14? I'm wondering if they are the same levers as the H2SX
0 x

User avatar
cOoTeR
High Boost
High Boost
Posts: 1133
Joined: Dec 15th, 2017
Location: United States
x 105
x 527

Re: Aftermarket levers?

Post by cOoTeR » Sat Apr 27, 2019 3:19 am


TallNinja wrote:
Sat Apr 27, 2019 3:01 am
Anyone have a zx14? I'm wondering if they are the same levers as the H2SX
From this very thread :no:
kman0066 wrote:
Fri Jun 22, 2018 12:19 pm
Well, tried the ZX14 levers. They fit and work for the actuation, but the tabs for the brake and clutch switches are in the wrong spot. Looks like we'll have to wait for a real aftermarket company to make some :(
1 x

Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs

User avatar
TallNinja
Boost Engaged
Boost Engaged
Posts: 21
Joined: Mar 5th, 2019
Location: Manitoba
Bike(s): 1979 CB750, XSR900
x 31
x 3

Re: Aftermarket levers?

Post by TallNinja » Sat Apr 27, 2019 3:23 am


cOoTeR wrote:
Sat Apr 27, 2019 3:19 am
TallNinja wrote:
Sat Apr 27, 2019 3:01 am
Anyone have a zx14? I'm wondering if they are the same levers as the H2SX
From this very thread :no:
kman0066 wrote:
Fri Jun 22, 2018 12:19 pm
Well, tried the ZX14 levers. They fit and work for the actuation, but the tabs for the brake and clutch switches are in the wrong spot. Looks like we'll have to wait for a real aftermarket company to make some :(
My bad....I've been reading several threads (Facebook, other forums) and I've mixed up my findings. Thanks for correcting me
0 x

User avatar
Raddy47
Accelerating
Accelerating
Posts: 211
Joined: Mar 10th, 2019
x 51
x 36

Re: Aftermarket levers?

Post by Raddy47 » Mon Jul 01, 2019 7:36 pm


Bump
0 x

User avatar
JEDREK
New Member
New Member
Posts: 4
Joined: May 2nd, 2019
Location: Perth, Western Australia
Bike(s): Kawasaki Ninja H2 SX SE+
x 1

Aftermarket levers available

Post by JEDREK » Sun Sep 08, 2019 4:35 am


Not sure if you've spotted these:

https://www.probrake.de/probrake-clutch ... inja-H2-SX

Came across them this week. Not sure that i like The adjustable design of length for 2 - 4 fingers.....
1 x

User avatar
CoolDaddyGroove
Pressure Building
Pressure Building
Posts: 62
Joined: Sep 1st, 2019
Location: Vancouver Canada
Bike(s): 2019 H2 SX
x 1
x 27

Re: Aftermarket levers?

Post by CoolDaddyGroove » Sun Sep 08, 2019 1:38 pm


I just picked up an H2SX and thought my Pazzo Levers from my N1K would fit, they don't. Contacted Pazzo (they are in my city) and they will develop a set for the H2SX if I give them my stock levers. Riding season here in Vancouver will be over on about a month, so at that time I will pull mine off and give them to Pazzo to develop a set.
3 x

User avatar
JEDREK
New Member
New Member
Posts: 4
Joined: May 2nd, 2019
Location: Perth, Western Australia
Bike(s): Kawasaki Ninja H2 SX SE+
x 1

Re: Aftermarket levers?

Post by JEDREK » Mon Sep 09, 2019 12:03 am


Excellent. Look fwd to seeing them.
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: No registered users and 33 guests