Aftermarket levers?

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
Pyrocritic
Pressure Building
Pressure Building
Posts: 93
Joined: Dec 20th, 2017
x 13
x 51

Aftermarket levers?

Post by Pyrocritic » Fri Mar 23, 2018 1:18 am


black with green adjuster or green with black adjusters ? :scratch: yeah, these picutres suck but you get the idea.
Attachments
100_2934_00.jpg
pazzo.jpg
pazzo.jpg (22.37 KiB) Viewed 2257 times
0 x

User avatar
cOoTeR
High Boost
High Boost
Posts: 1133
Joined: Dec 15th, 2017
Location: United States
x 105
x 527

Re: Aftermarket levers?

Post by cOoTeR » Fri Mar 23, 2018 11:30 am


That's going to be a matter of personal opinion. The all green is kind of risky. If the green matches the paint perfectly it'll look awesome. But if its as off color it might like horrible.
1 x

Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs

User avatar
ghostwriter78
Low Boost
Low Boost
Posts: 137
Joined: Feb 12th, 2018
Location: Chiang Mai / Thailand
Website: viewtopic.php?f=16&t=137
x 184
x 35

Re: Aftermarket levers?

Post by ghostwriter78 » Fri Mar 23, 2018 11:42 am


cOoTeR wrote:
Fri Mar 23, 2018 11:30 am
That's going to be a matter of personal opinion. The all green is kind of risky. If the green matches the paint perfectly it'll look awesome. But if its as off color it might like horrible.
Exactly my worry. The new Kawa shiny perly green is hard to match. if the color of addons doesnt exactly match the other bike parts its going to look cheap :( and that applies for ANY part.
0 x

Current: H2 SX SE 2018, FZ6 2010, CB1 :D
Sold: R6 2008, 2x CBR650F ('14/'17), CBR500R, CBR250R

User avatar
Pyrocritic
Pressure Building
Pressure Building
Posts: 93
Joined: Dec 20th, 2017
x 13
x 51

Re: Aftermarket levers?

Post by Pyrocritic » Fri Mar 23, 2018 1:48 pm


cOoTeR wrote:
Fri Mar 23, 2018 11:30 am
That's going to be a matter of personal opinion. The all green is kind of risky. If the green matches the paint perfectly it'll look awesome. But if its as off color it might like horrible.
yep, my worry as well. Balck with green adjusters is probably the safest way to go, or just black/black.
0 x

User avatar
n2wldlfe
14.7 psi
14.7 psi
Posts: 10
Joined: Mar 8th, 2018
Location: Washington, DC
Bike(s): 05 Busa, 2018 Kawasaki H2 SX SE
x 2
x 3

Re: Aftermarket levers?

Post by n2wldlfe » Mon Jun 04, 2018 6:46 am


Do you have a link to some levers? Would like to give it a try
0 x

User avatar
BoostedOne
Pressure Building
Pressure Building
Posts: 96
Joined: Dec 1st, 2017
Location: Montecito
x 12
x 34

Re: Aftermarket levers?

Post by BoostedOne » Mon Jun 04, 2018 2:11 pm


n2wldlfe wrote:
Mon Jun 04, 2018 6:46 am
Do you have a link to some levers? Would like to give it a try
Pazzo appears to have some in the works

http://www.pazzoracing.com/guide.html
0 x

User avatar
MisterScott
Starting Engine
Starting Engine
Posts: 5
Joined: Apr 10th, 2018
Location: Denver
Bike(s): A few
x 3

Re: Aftermarket levers?

Post by MisterScott » Mon Jun 11, 2018 12:26 pm


I have Pazzo levers on two other bikes. Just put them on my 2017 KTM 1290R. They are very nice and I really notice a difference in how the action feels. No dog in the hunt with Pazzo though I do believe they have a race team which I am happy to support with their products. Out of Canada. Ordered a set off eBay and they were mislabeled by the seller. Wound up ordering directly from Pazzo and their email comms were great. If the green concerns you order black. You can get the adjustment dial in black or colored as well. So perhaps that for a green accent. Recommended.
0 x

User avatar
kman0066
Accelerating
Accelerating
Posts: 226
Joined: Dec 6th, 2017
Location: Nolensville, TN
x 16
x 103

Re: Aftermarket levers?

Post by kman0066 » Fri Jun 22, 2018 12:19 pm


Well, tried the ZX14 levers. They fit and work for the actuation, but the tabs for the brake and clutch switches are in the wrong spot. Looks like we'll have to wait for a real aftermarket company to make some :(
0 x

User avatar
TallNinja
Boost Engaged
Boost Engaged
Posts: 21
Joined: Mar 5th, 2019
Location: Manitoba
Bike(s): 1979 CB750, XSR900
x 31
x 3

Re: Aftermarket levers?

Post by TallNinja » Wed Apr 10, 2019 12:24 am


Pyrocritic wrote:
Fri Mar 23, 2018 1:18 am
black with green adjuster or green with black adjusters ? :scratch: yeah, these picutres suck but you get the idea.
What brand/where did you get your levers from? I'm dying to put some shorties on mine but I'm struggling to find them online. Thanks!
0 x

User avatar
Tony Nitrous
Low Boost
Low Boost
Posts: 113
Joined: Nov 10th, 2018
Location: Brisbane
Bike(s): 8 Suzuki’s
x 39
x 44

Re: Aftermarket levers?

Post by Tony Nitrous » Wed Apr 10, 2019 1:07 am


I avoid the Chinese versions.
Seen too many issues with them, I have Pazzo’s on a couple of bikes.

A black on black genuine Pazzo set is tempting.
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: JaseG, turbodave and 34 guests