ECU Flashing

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
JonTheChron
Medium Boost
Medium Boost
Posts: 544
Joined: Dec 10th, 2017
Location: Quebec
Bike(s): H2 SX SE '18
Website: http://supercharged.ninja
x 137
x 161

Re: ECU Flashing

Post by JonTheChron » Fri Mar 16, 2018 2:44 am


Awesome
1 x

2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)

User avatar
WR-NA
Pressure Building
Pressure Building
Posts: 96
Joined: Mar 15th, 2018
Bike(s): 2009 ZX6R (Race), 2011 ZX10R, 2016 ZX10R, 2017 Z125 Pro, 2018 Ninja 400 (Race), 2019 H2, 2020 Z H2
x 48
x 86

Re: ECU Flashing

Post by WR-NA » Fri Mar 16, 2018 5:34 am


Software and hardware released!
1 x

User avatar
JonTheChron
Medium Boost
Medium Boost
Posts: 544
Joined: Dec 10th, 2017
Location: Quebec
Bike(s): H2 SX SE '18
Website: http://supercharged.ninja
x 137
x 161

Re: ECU Flashing

Post by JonTheChron » Fri Mar 16, 2018 6:27 am


Now all we're missing are our bikes.. lol
1 x

2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)

User avatar
DeRox
Low Boost
Low Boost
Posts: 174
Joined: Dec 12th, 2017
Location: Netherlands
Website: http://www.zx11.nl
x 43
x 72

Re: ECU Flashing

Post by DeRox » Fri Mar 16, 2018 7:33 am


WR-NA wrote:
Fri Mar 16, 2018 5:34 am
Software and hardware released!
:cheer:
1 x

2018 H2 SX SE

User avatar
Ninja H2SX
Low Boost
Low Boost
Posts: 123
Joined: Dec 2nd, 2017
Location: WA State
x 30
x 36

Re: ECU Flashing

Post by Ninja H2SX » Fri Mar 16, 2018 8:32 am


The gain on the top end is insane ... just look at my eyes !
1 x

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 875
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 298
x 655

Re: ECU Flashing

Post by vcyclenut » Fri Mar 16, 2018 12:58 pm


Hey Anthony,

welcome to the forum and thanks for adding to the thread!!


I just ordered my bike side harness!!

Now as stated just need the bike!!
1 x

User avatar
WR-NA
Pressure Building
Pressure Building
Posts: 96
Joined: Mar 15th, 2018
Bike(s): 2009 ZX6R (Race), 2011 ZX10R, 2016 ZX10R, 2017 Z125 Pro, 2018 Ninja 400 (Race), 2019 H2, 2020 Z H2
x 48
x 86

Re: ECU Flashing

Post by WR-NA » Fri Mar 16, 2018 2:34 pm


Thanks! Harness (and RJ11 cable) will go out today!

Seriously debating on pulling my deposit on the V4 S and plunking down the cash for the SE instead once the bikes start rolling into dealerships!
0 x

User avatar
cOoTeR
High Boost
High Boost
Posts: 1133
Joined: Dec 15th, 2017
Location: United States
x 105
x 527

Re: ECU Flashing

Post by cOoTeR » Fri Mar 16, 2018 4:37 pm


Out of curiosity what were the environmental conditions during this dyno run?
0 x

Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs

User avatar
WR-NA
Pressure Building
Pressure Building
Posts: 96
Joined: Mar 15th, 2018
Bike(s): 2009 ZX6R (Race), 2011 ZX10R, 2016 ZX10R, 2017 Z125 Pro, 2018 Ninja 400 (Race), 2019 H2, 2020 Z H2
x 48
x 86

Re: ECU Flashing

Post by WR-NA » Fri Mar 16, 2018 6:29 pm


I wasn't there as this was done in Australia by the Australian team (I'm the North American rep).
But based on historical data, weather conditions that day around that time were
82 Degrees, 59% humidity, 29.76" Hg, ~26' or so above sea level

I can probably ask Justin about about the conditions as reported from the dyno weather station if needed...
0 x

User avatar
UNUZ3D
Boost Engaged
Boost Engaged
Posts: 41
Joined: Mar 9th, 2018
Location: UK
Bike(s): 18 Ninja H2 SX SE Performance Touring. 07 Ninja Zx10r
x 8
x 9

Re: ECU Flashing

Post by UNUZ3D » Fri Mar 16, 2018 7:03 pm


Wow, nice gains. This actually might be worth throwing away my lifetime warranty for.
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: JaseG, turbodave and 31 guests