Hello from Central AZ
- Thunderdawg
- Supercharged!
- Posts: 315
- Joined: Fri Feb 16, 2018 2:05 am
- Location: Central AZ
- Bike(s): 2018 Ninja H2 SX SE
- x 45
- x 6
Hello from Central AZ
Just found this forum yesterday. I ordered an SE in December and as with others waiting to here when it will arrive. The extra bits I ordered are at the dealer's, just not the bike itself.
0 x
Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads
Re: Hello from Central AZ
Hello. Where are you in AZ what dealership are you going through?
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
- Thunderdawg
- Supercharged!
- Posts: 315
- Joined: Fri Feb 16, 2018 2:05 am
- Location: Central AZ
- Bike(s): 2018 Ninja H2 SX SE
- x 45
- x 6
Re: Hello from Central AZ
cOoTeR, I am in Yavapai county between Prescott and Chino Valley. The local dealership is Star Island Motorsports in Prescott Valley.
0 x
Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads
- Thunderdawg
- Supercharged!
- Posts: 315
- Joined: Fri Feb 16, 2018 2:05 am
- Location: Central AZ
- Bike(s): 2018 Ninja H2 SX SE
- x 45
- x 6
Re: Hello from Central AZ
Thanks! I have noticed a few of the same folks from the NinjaH2 forum. I ordered the bags (panniers) and associated items required to actually put them on the bike, the bag liners and the knee pads.
I see you are in Austin. My wife and I are going there in April for the MotoGP races. Flying, not riding.
0 x
Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads
- UFO
- Supercharged!
- Posts: 404
- Joined: Thu Nov 30, 2017 5:36 am
- Location: PNW, USA
- Bike(s): '18 H2SX SE
- x 1
- x 25
Re: Hello from Central AZ
How much did the bags and hardware run you? Did you get a discount from the dealer?Thunderdawg wrote: ↑Sat Feb 17, 2018 9:48 pmI ordered the bags (panniers) and associated items required to actually put them on the bike
0 x
- Thunderdawg
- Supercharged!
- Posts: 315
- Joined: Fri Feb 16, 2018 2:05 am
- Location: Central AZ
- Bike(s): 2018 Ninja H2 SX SE
- x 45
- x 6
Re: Hello from Central AZ
At this point, I have a non-specific promise of a discount on the accessories. So far, the dealer has been very good about pricing. Time will tell when I write the next check.UFO wrote: ↑Sat Feb 17, 2018 11:14 pmHow much did the bags and hardware run you? Did you get a discount from the dealer?Thunderdawg wrote: ↑Sat Feb 17, 2018 9:48 pmI ordered the bags (panniers) and associated items required to actually put them on the bike
0 x
Vcyclenut: ZX-10 header, Lextek midpipe and can, Sprint P08 F1-85 air filter, PAIR valve block off plates, ECU flash, Woodcraft frame slider
Evotech radiator guard
Ohlins SD-021 steering damper & Bryan468 mounts, CL front brake pads
Re: Hello from Central AZ
My dealer told me they'd sell the bags to me at cost. I was told msrp is $1,200 for the full set up. They told me the normal markup was about 20% so they are going to sell them to me for $1,000 give or take depending on Kawasaki's official dealer cost.Thunderdawg wrote: ↑Sun Feb 18, 2018 4:26 amAt this point, I have a non-specific promise of a discount on the accessories. So far, the dealer has been very good about pricing. Time will tell when I write the next check.UFO wrote: ↑Sat Feb 17, 2018 11:14 pmHow much did the bags and hardware run you? Did you get a discount from the dealer?Thunderdawg wrote: ↑Sat Feb 17, 2018 9:48 pmI ordered the bags (panniers) and associated items required to actually put them on the bike
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
Re: Hello from Central AZ
Same with my dealer they give me discounts on everything. That's why love spending 200-300 cause normally it would cost 300-500
0 x
meble kuchenne na wymiar warszawa cennik
Who is online
Users browsing this forum: No registered users and 2 guests