1/2” bar spacer kit.

Post by **Bryan468** » Tue Oct 08, 2019 11:36 pm

1/2” bar spacer kits include 2 spacers, 2 locating bolts, 2 locating spacers, brake line relocation bracket, and a bolt for the brake line bracket.

Price is $150 plus shipping.

Electronic suspension version of spacers.

Installation instructions:
https://documentcloud.adobe.com/link/t ... d4c4af3d29

Post by **Champ87** » Wed Oct 09, 2019 1:13 am

Nice work Bryan.

In the photos above it looks like you had to drop the front end ½" to have enough fork tube to re-clamp the bars. True/False?

Post by **Bryan468** » Wed Oct 09, 2019 2:24 am

Champ87 wrote: Wed Oct 09, 2019 1:13 am Nice work Bryan.

In the photos above it looks like you had to drop the front end ½" to have enough fork tube to re-clamp the bars. True/False?

No, that’s the stock height of the bike. No drop is necessary to run the spacers.

Post by **Champ87** » Wed Oct 09, 2019 3:04 am

Bryan468 wrote: Wed Oct 09, 2019 2:24 am No, that’s the stock height of the bike. No drop is necessary to run the spacers.

OK, now I've looked at the install instructions I see the top of the fork is down inside the bar clamp a little whereas with the stock setup, the top of the fork sits flush.

The finish looks very nice - matches the factory original.

Post by **SidneyCarton** » Wed Oct 09, 2019 11:05 am

Do you think it is possible to stack two of the 1/2 inch spacers to elevate the bars 1 inch? The brake line would definitely need to be altered using the relocation bracket and a longer bolt sourced. Thanks.

Post by **Bryan468** » Wed Oct 09, 2019 11:26 am

SidneyCarton wrote: Wed Oct 09, 2019 11:05 am Do you think it is possible to stack two of the 1/2 inch spacers to elevate the bars 1 inch? The brake line would definitely need to be altered using the relocation bracket and a longer bolt sourced. Thanks.

No I don’t think you could pull it off. You would run out of fork tube to clamp to if you didn’t lower the front of the bike and the controls on the clutch side would hit the fairing when you turn the bars all the way to the right.

I think the max height that would work is going to be around 3/4” and I would definitely recommend lowering the front end a little to maintain sufficient fork tube to clamp to and you would have to run the bars in the farthest back position you could or the controls would hit.

Post by **wellcraft** » Mon May 04, 2020 2:51 pm

Do you still have these for sale?

Post by **Bryan468** » Mon May 04, 2020 4:28 pm

wellcraft wrote: Mon May 04, 2020 2:51 pm Do you still have these for sale?

Yes, I’m currently waiting for the next batch to get powder coated. If you’d like I can let you know when I have them ready to ship.

Post by **wellcraft** » Mon May 04, 2020 9:25 pm

Bryan468 wrote: Mon May 04, 2020 4:28 pm
wellcraft wrote: Mon May 04, 2020 2:51 pm Do you still have these for sale?
Yes, I’m currently waiting for the next batch to get powder coated. If you’d like I can let you know when I have them ready to ship.

Please do so, you can reach me here or on FB. Thanks

Post by **jovonni40** » Mon May 04, 2020 11:03 pm

I am interested as well won’t let me send a pm

1/2” bar spacer kit.

1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Re: 1/2” bar spacer kit.

Who is online