Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
-
kingroslolo
- Boost Engaged
- Posts: 27
- Joined: Mon Sep 03, 2018 8:40 pm
- Location: Seattle
- Bike(s): H2 sx se #251
Post
by kingroslolo » Tue Oct 01, 2019 3:20 am
so I followed the shop manual and video online, Ready to drain the coolant, remove the clutch pressure stuff.. NOT NEEDED!!! GOT SPROCKET OFF!! I forgot to mention I remove the chain
, if chain remove piece of cake.... No I have extra coolant for futur project...
0 x
-
Keenan121
- Supercharged!
- Posts: 17
- Joined: Sat May 02, 2020 5:45 am
- Location: Ogden, Utah
- Bike(s): H2 SX SE+, GSX-S 750
- x 5
Post
by Keenan121 » Fri Jan 01, 2021 7:46 am
soooo can you elaborate on the whole process you did?
0 x
-
Champ87
- Supercharged!
- Posts: 1287
- Joined: Mon Apr 09, 2018 1:43 am
- Location: NW Indiana US
- Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
- x 301
- x 552
Post
by Champ87 » Fri Jan 01, 2021 3:23 pm
The key part of kingroslolo's post is that he removed the chain. If you're fitting a new chain anyway then you can avoid loosening the water pump and clutch slave cylinder. If you press out a link and roll the chain off the sprockets, then you can slide the sprocket off without removing the guard. Remember to loosen the sprocket nut while the chain is still in place.
0 x
Champ87
It's amazing how fast you can go when you take your time.
-
Snakes709
- Supercharged!
- Posts: 1396
- Joined: Sun Aug 19, 2018 2:42 am
- Location: Edmonton, AB
- Bike(s): 2018 H2 SX SE
- x 11
- x 387
Post
by Snakes709 » Fri Jan 01, 2021 4:27 pm
On a side note, always a good time to clean all the dirt and oil. I didnt replace my sprocket but i pulled my cover off when i put my bike away for the winter and cleaned all that shit out. Also took my cf sprocket cover and cleaned the inside in the bathroom sink. Wife didnt like that lol
0 x
2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler
Who is online
Users browsing this forum: Bing [Bot] and 57 guests
, if chain remove piece of cake.... No I have extra coolant for futur project... 
