Sprint air filter questions

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
Racer-X
Supercharged!

Supercharged!
Posts: 254
Joined: Sun Apr 07, 2019 10:10 pm
x 4
x 44

Re: Sprint air filter questions

Post by Racer-X » Mon Mar 02, 2026 12:36 am


Surely as long as the intake mesh is no finer than the mesh of the filter itself you would not lose power?

When I replaced the intake grilles on mine I got *slightly* finer mesh and note I have less large insects (think bees and larger) in my filter now but still get the smaller bugs that can fit through the holes.
0 x

User avatar
Vex
Supercharged!

Supercharged!
Posts: 1505
Joined: Sun Sep 08, 2019 5:19 pm
Location: Washington
Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
x 381
x 417

Re: Sprint air filter questions

Post by Vex » Mon Mar 02, 2026 2:02 am


Entirely dependent on the mesh you put in place. Something slightly tighter than the current one? Probably not an issue. A super fine mesh? That could end up a problem, between bugs, water (if you live in a wet area), dirt, etc.

Most of the higher performance filters we out in our bikes can already flow more air than our supercharger will actually suck in.

I've also thought about putting a mesh into my intake, but it'd need to be something easy to remove and clean.
0 x

2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp

User avatar
Racer-X
Supercharged!

Supercharged!
Posts: 254
Joined: Sun Apr 07, 2019 10:10 pm
x 4
x 44

Re: Sprint air filter questions

Post by Racer-X » Tue Mar 03, 2026 2:08 am


Fair enough .. calling it "mesh" is probably misleading. I made new grilles (cos I wanted one on the RHS also so they needed to match) and took the size of the diamond shape down to 10mm width (original is 14mm). Seat of the pants dyno did not notice any power reduction but I do get noticeably less bugs in the filter. To be fair I doubt that matters really .. the filter is there to catch crap and bugs are just that. It also doesn't mean I clean my filter any less often.
0 x

User avatar
DalslandRider
Boost Engaged

Boost Engaged
Posts: 27
Joined: Wed Oct 01, 2025 9:37 am
Location: Bengtsfors
Bike(s): NX650, ZX9-R, H2SXSE+
x 12
x 4

Re: Sprint air filter questions

Post by DalslandRider » Tue Mar 03, 2026 8:18 pm


F1 are ment for Track riding. Gives you more air and possible more power. But also let thru more debris that can damage your Engine. So think very careful about where and what type roads ride.
Compressed air the best for this one. Yes can wash, still good to blow with air. What you can do, is to Take it down to a Place where you fill air in your tyres. Or you can Take a Wheel that you fill up to it Max with air and use that. But you can Compressor cheap and Small. To Small for work but good enough for this and put air in your tyres. I paid about 60 dollar for a Electric Ryobi 9 or 10 years ago. Still works😊
0 x

User avatar
Vex
Supercharged!

Supercharged!
Posts: 1505
Joined: Sun Sep 08, 2019 5:19 pm
Location: Washington
Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
x 381
x 417

Re: Sprint air filter questions

Post by Vex » Wed Mar 04, 2026 2:37 am


The F1 is trash and shouldn't even be used on a track. There are numerous threads here about it. It does let more air flow (because there is basically nothing there), but it's not actually any more air than your bike is sucking in with the normal DNA/Sprint filter.

Save the money, and your internals.
1 x

2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: Sprint air filter questions

Post by Snakes709 » Wed Mar 04, 2026 4:05 pm


I had a chat with vcyclenut about the filters and he said there was zero horsepower difference between the Sprint p08 and f1. The only time the f1 would benefit is if you are changing supercharger gears and even then, i wouldnt use it. At that point, why even use an air filter?
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Vex
Supercharged!

Supercharged!
Posts: 1505
Joined: Sun Sep 08, 2019 5:19 pm
Location: Washington
Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
x 381
x 417

Re: Sprint air filter questions

Post by Vex » Wed Mar 04, 2026 8:56 pm


Snakes709 wrote: Wed Mar 04, 2026 4:05 pm I had a chat with vcyclenut about the filters and he said there was zero horsepower difference between the Sprint p08 and f1. The only time the f1 would benefit is if you are changing supercharger gears and even then, i wouldnt use it. At that point, why even use an air filter?
I have upgraded supercharger gears. There was no difference between my DNA (equivalent to the P08), and the F1. Came out making the same power, and I didn't have to destroy another supercharger or vacuum sand out of my internals to accomplish it.
0 x

2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: Sprint air filter questions

Post by Snakes709 » Thu Mar 05, 2026 1:48 am


Vex wrote: Wed Mar 04, 2026 8:56 pm
Snakes709 wrote: Wed Mar 04, 2026 4:05 pm I had a chat with vcyclenut about the filters and he said there was zero horsepower difference between the Sprint p08 and f1. The only time the f1 would benefit is if you are changing supercharger gears and even then, i wouldnt use it. At that point, why even use an air filter?
I have upgraded supercharger gears. There was no difference between my DNA (equivalent to the P08), and the F1. Came out making the same power, and I didn't have to destroy another supercharger or vacuum sand out of my internals to accomplish it.

I think going with a larger compressor that Edge Mallis offers would be more beneficial then a f1 filter. Not just because more boost but if you look at every picture people post of their dirty filter, only a small portion of the filter is covered. I think using more surface area then more air flow would make more power.
0 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

User avatar
Vex
Supercharged!

Supercharged!
Posts: 1505
Joined: Sun Sep 08, 2019 5:19 pm
Location: Washington
Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
x 381
x 417

Re: Sprint air filter questions

Post by Vex » Tue Mar 10, 2026 3:00 am


Got a link to it? Mostly I'm seeing promotional stuff for his drag bike.
0 x

2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp

User avatar
Snakes709
Supercharged!

Supercharged!
Posts: 1399
Joined: Sun Aug 19, 2018 2:42 am
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 11
x 394

Re: Sprint air filter questions

Post by Snakes709 » Wed Mar 11, 2026 12:14 am


Unfortunately not. You gotta contact him snd he will set you up with the shop he works with. I been debating just to do something different then other people. Plus it has its advantages over gears.
1 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests