front axle sliders avaialble

Vendors, please post a thread about your H2SX products here.
Post Reply
User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 615
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 186
x 435

front axle sliders avaialble

Post by vcyclenut » Wed Sep 11, 2019 12:14 pm


I sent my front axle off to woodcraft so we could get some front axle sliders for our bikes, they are available here

https://www.vcyclenut.com/store/p131/H2 ... Kits_.html
3 x

User avatar
Reciprocal
Pressure Building
Pressure Building
Posts: 78
Joined: May 25th, 2019
Location: Aurora
Bike(s): H2 SX SE
x 57
x 41

Re: front axle sliders avaialble

Post by Reciprocal » Wed Sep 11, 2019 5:31 pm


If you haven't tested them, how do you know they work? If you have tested them, I'm sorry.. :rolleyes:
0 x

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 615
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 186
x 435

Re: front axle sliders avaialble

Post by vcyclenut » Wed Sep 11, 2019 8:39 pm


Reciprocal wrote:
Wed Sep 11, 2019 5:31 pm
If you haven't tested them, how do you know they work? If you have tested them, I'm sorry.. :rolleyes:
I haven't crash tested them but I have fit tested them,

these sliders have been crash tested on many bikes over the years and do work
1 x

User avatar
Bryan468
Pressure Building
Pressure Building
Posts: 85
Joined: Apr 2nd, 2019
x 27
x 38

Re: front axle sliders avaialble

Post by Bryan468 » Thu Sep 12, 2019 1:55 am


vcyclenut wrote:
Wed Sep 11, 2019 8:39 pm
Reciprocal wrote:
Wed Sep 11, 2019 5:31 pm
If you haven't tested them, how do you know they work? If you have tested them, I'm sorry.. :rolleyes:
I haven't crash tested them but I have fit tested them,

these sliders have been crash tested on many bikes over the years and do work
Do you have any pictures of what they look like on the bike?
0 x

Vcyclenut zx10 header/full exhaust
Vcyclenut flash
Sprint filter
Pair valve delete
Tial blow off valve
Zx10 revalved steering damper
1/2” bar risers

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 615
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 186
x 435

Re: front axle sliders avaialble

Post by vcyclenut » Thu Sep 12, 2019 12:24 pm


Bryan468 wrote:
Thu Sep 12, 2019 1:55 am
vcyclenut wrote:
Wed Sep 11, 2019 8:39 pm
Reciprocal wrote:
Wed Sep 11, 2019 5:31 pm
If you haven't tested them, how do you know they work? If you have tested them, I'm sorry.. :rolleyes:
I haven't crash tested them but I have fit tested them,

these sliders have been crash tested on many bikes over the years and do work
Do you have any pictures of what they look like on the bike?
I added some to the listing

https://www.vcyclenut.com/store/p131/H2 ... Kits_.html
1 x

User avatar
dieseldad60
Pressure Building
Pressure Building
Posts: 91
Joined: Jan 9th, 2019
Location: North Carolina
Bike(s): 2018 Kawasaki H2 SX SE, 2001 Ducati ST4
x 92
x 31

Re: front axle sliders avaialble

Post by dieseldad60 » Thu Sep 12, 2019 4:11 pm


Ordered! Thanks!! Been wanting some fork sliders :)
1 x

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 615
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 186
x 435

Re: front axle sliders avaialble

Post by vcyclenut » Mon Sep 16, 2019 2:34 pm


thanks, I shipped it and you should have it already
0 x

User avatar
dieseldad60
Pressure Building
Pressure Building
Posts: 91
Joined: Jan 9th, 2019
Location: North Carolina
Bike(s): 2018 Kawasaki H2 SX SE, 2001 Ducati ST4
x 92
x 31

Re: front axle sliders avaialble

Post by dieseldad60 » Tue Sep 17, 2019 7:14 pm


vcyclenut wrote:
Mon Sep 16, 2019 2:34 pm
thanks, I shipped it and you should have it already
Yup, I got them. Then I realized I needed a front axle tool :) . BTW, did you loosen both side of the axle (all 4 clamp bolts) when removing the axle nut and installing the slider on that side? Just wondering if I needed to basically pretend I was taking off the front wheel.... just wondering.

Thanks again!
0 x

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 615
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 186
x 435

Re: front axle sliders avaialble

Post by vcyclenut » Tue Sep 17, 2019 8:19 pm


dieseldad60 wrote:
Tue Sep 17, 2019 7:14 pm
vcyclenut wrote:
Mon Sep 16, 2019 2:34 pm
thanks, I shipped it and you should have it already
Yup, I got them. Then I realized I needed a front axle tool :) . BTW, did you loosen both side of the axle (all 4 clamp bolts) when removing the axle nut and installing the slider on that side? Just wondering if I needed to basically pretend I was taking off the front wheel.... just wondering.

Thanks again!
I did have the axel out to send it out to woodcraft, I cant see any reason you would have to loosen the one side pinch bolts
0 x

User avatar
dieseldad60
Pressure Building
Pressure Building
Posts: 91
Joined: Jan 9th, 2019
Location: North Carolina
Bike(s): 2018 Kawasaki H2 SX SE, 2001 Ducati ST4
x 92
x 31

Re: front axle sliders avaialble

Post by dieseldad60 » Tue Sep 17, 2019 10:19 pm


vcyclenut wrote:
Tue Sep 17, 2019 8:19 pm
dieseldad60 wrote:
Tue Sep 17, 2019 7:14 pm
vcyclenut wrote:
Mon Sep 16, 2019 2:34 pm
thanks, I shipped it and you should have it already
Yup, I got them. Then I realized I needed a front axle tool :) . BTW, did you loosen both side of the axle (all 4 clamp bolts) when removing the axle nut and installing the slider on that side? Just wondering if I needed to basically pretend I was taking off the front wheel.... just wondering.

Thanks again!
I did have the axel out to send it out to woodcraft, I cant see any reason you would have to loosen the one side pinch bolts
Me neither but I have learned to ask if I am unsure .... after making a lot of mistakes :) Thanks Dave.
1 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: No registered users and 2 guests