Exhaust replacements

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
Post Reply
User avatar
Fred
Pressure Building
Pressure Building
Posts: 68
Joined: Thu Dec 14, 2017 8:01 pm
Location: Netherlands (Soest)
Bike(s): H2SX
x 8

Re: Exhaust replacements

Post by Fred » Fri Apr 20, 2018 7:54 pm

Last 2 day's i had contact with Bodis exhausts (http://www.bodis-exhaust.com/) because i saw the YouTube video.
It was a prototype and within near future this exhaust for the H2SX. But it the exhaust will have a e-number but will not be homologated for the bike.
So the waiting for a nice and homologated exhaust continues.
0 x
Top
User avatar
KevinRLi
Pressure Building
Pressure Building
Posts: 89
Joined: Wed Jan 24, 2018 4:22 pm
Location: New York
x 1

Re: Exhaust replacements

Post by KevinRLi » Fri Apr 20, 2018 10:24 pm

57x wrote: ↑
Fri Apr 20, 2018 4:40 pm
KevinRLi wrote: ↑
Fri Apr 20, 2018 12:00 am
 8" stainless steel 2.25" OD pipe from my local speed shop. and a 2.25" inlet Micron can from Ebay. Done until something better comes along. Cost? $150 to my door.
Is that 8" pipe straight, or curve in it? If curved, could you guess the angle?
Straight. If I was more mechanically inclined I would have attempted a bent pipe. Ha.. The pipe and can are on an angle but it all works.
0 x
1980 CB650 Sold to an older guy in CT to "tinker" with.
2007 Bandit 1250 Traded in for the 2012 C14.
2012 Concours 14 Traded in for the 2015 C14.
2015 Concours 14 Traded in for the SX SE.
2018 H2 SX SE. Traded in for the SX SE+
2021 H2 SX SE+
Top
User avatar
MadeInJapan
Pressure Building
Pressure Building
Posts: 71
Joined: Mon Feb 12, 2018 11:28 am
Location: Tokyo

Re: Exhaust replacements

Post by MadeInJapan » Sat Apr 21, 2018 11:22 pm

Just saw this on some blog
Attachments
Screenshot_20180422-081050.png
Screenshot_20180422-081156.png
0 x
Top
User avatar
ToolBoX
New Member
New Member
Posts: 2
Joined: Sat Apr 21, 2018 11:30 pm
Location: Dorset, UK
Bike(s): H2 SX SE

Re: Exhaust replacements

Post by ToolBoX » Sat Apr 21, 2018 11:33 pm

Fred was this the video you saw for the Bodis exhaust?

0 x
Top
User avatar
Pyrocritic
Pressure Building
Pressure Building
Posts: 96
Joined: Wed Dec 20, 2017 5:50 am
x 4

Re: Exhaust replacements

Post by Pyrocritic » Sun Apr 22, 2018 1:25 am

MadeInJapan wrote: ↑
Sat Apr 21, 2018 11:22 pm
 Just saw this on some blog
why do people post only pictures of exhausts? It's like telling half, or even a third, of a story. :bash:
0 x
Top
User avatar
Fred
Pressure Building
Pressure Building
Posts: 68
Joined: Thu Dec 14, 2017 8:01 pm
Location: Netherlands (Soest)
Bike(s): H2SX
x 8

Re: Exhaust replacements

Post by Fred » Sun Apr 22, 2018 4:54 am

ToolBoX wrote: ↑
Sat Apr 21, 2018 11:33 pm
 Fred was this the video you saw for the Bodis exhaust?

Yes, that was the one. Looks very nice, not to loud. But no homologation.
0 x
Top
User avatar
cOoTeR
Supercharged!
Supercharged!
Posts: 1133
Joined: Fri Dec 15, 2017 3:40 am
Location: United States
x 1

Re: Exhaust replacements

Post by cOoTeR » Tue Apr 24, 2018 2:40 am

MadeInJapan wrote: ↑
Sat Apr 21, 2018 11:22 pm
 Just saw this on some blog
That looks like it's going to melt the bags pretty quick.
0 x
Stock with airfilter 164whp 84ft.lbs
De-restricted + tuned 213whp 97ft.lbs
Full vandemon exhaust with tune 221whp 99ft.lbs
On Race Fuel 233whp 103ft.lbs
Top
User avatar
kman0066
Accelerating
Accelerating
Posts: 226
Joined: Wed Dec 06, 2017 3:34 pm
Location: Nolensville, TN
x 1

Re: Exhaust replacements

Post by kman0066 » Fri May 18, 2018 6:12 pm

Yoshimura! Love it, now to find out how to actually purchase. Guessing there will be a delay while they build up inventory, let distributors know about it, etc. I'll just pick up a header like Arrow or Akra when/if they ever make it. But I love the Alpha cans from Yoshi!!!




Some more details with pricing:
https://motorsportsnewswire.com/2018/05 ... aki-h2-sx/
0 x
Top
User avatar
Pyrocritic
Pressure Building
Pressure Building
Posts: 96
Joined: Wed Dec 20, 2017 5:50 am
x 4

Re: Exhaust replacements

Post by Pyrocritic » Fri May 18, 2018 7:58 pm

2018 Kawasaki H2 SX Street Alpha SO SS/CF/CF
Part # 14210BM220
MSRP: $649.00
QUALIFIED MANUFACTURER DECLARED “REPLACEMENT PART”

2018 Kawasaki H2 SX Street Alpha SO SS/SS/CF
Part # 14210BM520
MSRP: $549.00
QUALIFIED MANUFACTURER DECLARED “REPLACEMENT PART”

2018 Kawasaki H2 SX Fender Eliminator kit
Part # 070BG142100
MSRP: $179.00

Stock muffler weight: 13.0 Lbs.
Alpha SS/CF/CF slip-on: 4.8 Lbs.
Alpha SS/SS/CF slip-on: 5.8 lbs.
Looks like they are making a carbon fiber can version, and a stainless can version. Will save you about 8 lbs, and about $600 over the Akra slipon. :lol:
0 x
Top
User avatar
Champ87
Supercharged!
Supercharged!
Posts: 938
Joined: Mon Apr 09, 2018 1:43 am
Location: NW Indiana US
Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E
x 80
x 189

Re: Exhaust replacements

Post by Champ87 » Fri May 18, 2018 8:33 pm

I wonder how the stainless looks. For some reason the carbon just doesn't look right on the H2 SX. Just my opinion of course - but then that's what counts in my world. :lol:
0 x
Champ87
It's amazing how fast you can go when you take your time.
Top
Post Reply
meble kuchenne na wymiar warszawa cennik

Return to “Mods & Maintenance”

Who is online

Users browsing this forum: Bing [Bot], superphreek and 13 guests