Odd noise at precisely 3500 revs
- JLW
- New Member

- Posts: 12
- Joined: Tue Jul 16, 2019 8:00 pm
- Location: Kent UK
- Bike(s): Previously Daytona 600, ZZR1400, KTM 990 Adventure, Z1000SX and now a H2 SX
Re: Odd noise at precisely 3500 revs
Thanks- it’s going in for the 600 mile service on Monday so hopefully they’ll locate the cause and fix it 
0 x
- JLW
- New Member

- Posts: 12
- Joined: Tue Jul 16, 2019 8:00 pm
- Location: Kent UK
- Bike(s): Previously Daytona 600, ZZR1400, KTM 990 Adventure, Z1000SX and now a H2 SX
Re: Odd noise at precisely 3500 revs
My 600 mile service became due whilst I was on holiday, after a 350 ride to where I was staying on vacation. On route to the Kawasaki dealer I noticed that the odd noise that had been bugging me was now absent. The long ride must have sorted out whatever was causing it! 
(Although knowing my luck it will return as soon as I get back home
)
(Although knowing my luck it will return as soon as I get back home
0 x
Re: Odd noise at precisely 3500 revs
I think your holiday some how helped to sort it out!JLW wrote: Wed Aug 28, 2019 1:40 pm My 600 mile service became due whilst I was on holiday, after a 350 ride to where I was staying on vacation. On route to the Kawasaki dealer I noticed that the odd noise that had been bugging me was now absent. The long ride must have sorted out whatever was causing it!
(Although knowing my luck it will return as soon as I get back home)
0 x
\
- JLW
- New Member

- Posts: 12
- Joined: Tue Jul 16, 2019 8:00 pm
- Location: Kent UK
- Bike(s): Previously Daytona 600, ZZR1400, KTM 990 Adventure, Z1000SX and now a H2 SX
Re: Odd noise at precisely 3500 revs
Grrrrrr - it came back. Going in for diagnostics in a week or so.

0 x
Re: Odd noise at precisely 3500 revs
If you put your bike on the center stand, and throttle it to 3500K RPM, will it show it's self?JLW wrote: Wed Sep 18, 2019 7:13 pm Grrrrrr - it came back. Going in for diagnostics in a week or so.![]()
![]()
If so, maybe pick up an engine sound stethoscope, and have a friend hold the RPM, while your 'listen' around your bike. Engine sound stethoscopes can be pretty cheap, and work very well.
0 x
\
- danham
- Supercharged!

- Posts: 595
- Joined: Sat Mar 02, 2019 6:40 pm
- Location: Cape Cod, MA USA
- Bike(s): 2018 SE
- x 194
- x 207
Re: Odd noise at precisely 3500 revs
Good advice. A "poor man's" stethoscope can be improvised using a screwdriver with a long shaft. Put the blade where you would put the stethoscope tip and put the handle against the bone just forward of your ear opening.Prof J wrote: Thu Sep 19, 2019 3:01 amIf you put your bike on the center stand, and throttle it to 3500K RPM, will it show it's self?JLW wrote: Wed Sep 18, 2019 7:13 pm Grrrrrr - it came back. Going in for diagnostics in a week or so.![]()
![]()
If so, maybe pick up an engine sound stethoscope, and have a friend hold the RPM, while your 'listen' around your bike. Engine sound stethoscopes can be pretty cheap, and work very well.
-dan
0 x
2018 H2 SX SE
Sprint P08 filter
Skene P3 rear LEDs
Skene Photon Blaster front LEDs
Woodcraft frame sliders
Nelson Rigg tail bag
DID 525ZVM-X2 chain
- JustinP
- Accelerating

- Posts: 121
- Joined: Sat Jul 13, 2019 8:22 pm
- Location: Greeley, CO
- Bike(s): 2018 H2 SX SE, 2008 Hayabusa, 2004 FJR
- x 1
Re: Odd noise at precisely 3500 revs
Harbor freight has one for 4 bucks.danham wrote: Thu Sep 19, 2019 11:11 amGood advice. A "poor man's" stethoscope can be improvised using a screwdriver with a long shaft. Put the blade where you would put the stethoscope tip and put the handle against the bone just forward of your ear opening.Prof J wrote: Thu Sep 19, 2019 3:01 amIf you put your bike on the center stand, and throttle it to 3500K RPM, will it show it's self?JLW wrote: Wed Sep 18, 2019 7:13 pm Grrrrrr - it came back. Going in for diagnostics in a week or so.![]()
![]()
If so, maybe pick up an engine sound stethoscope, and have a friend hold the RPM, while your 'listen' around your bike. Engine sound stethoscopes can be pretty cheap, and work very well.
-dan
0 x
- JLW
- New Member

- Posts: 12
- Joined: Tue Jul 16, 2019 8:00 pm
- Location: Kent UK
- Bike(s): Previously Daytona 600, ZZR1400, KTM 990 Adventure, Z1000SX and now a H2 SX
SOLVED - Odd noise at precisely 3500 revs
The noise was a screw on my sat nav bracket that finger tightens into the sat nav to secure it. When unscrewed it is suspended by a spring. It seems 3500 revs was the resonant frequency. Explains why the sound seemed to be coming from my helmet - it was only inches away from the sat nav bracket. It also explains why the noise went away when I rode the bike on vacation- it was screwed into the sat nav then. Happy now 
0 x
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 87 guests

