Why not a Top Case?

Discuss apparel, gear, and tech for your rides.
User avatar
tuusinii
Low Boost
Low Boost
Posts: 102
Joined: Tue Oct 11, 2022 7:33 am
Location: Finland
Bike(s): 2018 H2 SX, 2000 ZX12R, 1986 Z1300DFI + EML Sidecar
x 24
x 63

Re: Why not a Top Case?

Post by tuusinii » Wed Nov 01, 2023 10:30 am


I never did like how the Givi placed the rear rack so far back. As I use it only to have a bag there with bungees and not top case it was little bit difficult. I now (that snow and winter has landed to Finland) started to look it and I've decided to drill new holes to the top plate (I have aluminium Givi Trekker rack M8B) and the rear rack and cut extra metal from back of. That way I can position the plate about 10cm (4") forward. Will be better for balance and also for looks. I'll post pictures when I'm ready. Looks quite straight forward solution.
Last edited by tuusinii on Thu Nov 02, 2023 12:18 pm, edited 1 time in total.
0 x

User avatar
tuusinii
Low Boost
Low Boost
Posts: 102
Joined: Tue Oct 11, 2022 7:33 am
Location: Finland
Bike(s): 2018 H2 SX, 2000 ZX12R, 1986 Z1300DFI + EML Sidecar
x 24
x 63

Re: Why not a Top Case?

Post by tuusinii » Thu Nov 02, 2023 7:41 am


Here are the before and after pictures:

New holes (top ones) and removed the back part of the rack frame with angle grinder:
Image

These parts were removed:
Image

This is before:
Image

And this after:
Image

So basically was able to move it about 10cm (4") forward. Had to change the orientation of the plat form original that is getting smaller in back to other way so it is coming wider at the end. Also added new holes to the plate to attach as close as possible. Now I think it will be much better to attach my waterproof bag when travelling. Also better for COG. When I'm able to get the bike out from carage I'll see how it looks in a better picture. If I find better looking top plate might go for that in future, but it is good also as is.
0 x

User avatar
Racer-X
Supercharged!
Supercharged!
Posts: 210
Joined: Sun Apr 07, 2019 10:10 pm
x 1
x 14

Re: Why not a Top Case?

Post by Racer-X » Wed Nov 08, 2023 10:22 pm


tuusinii wrote:
Thu Nov 02, 2023 7:41 am

So basically was able to move it about 10cm (4") forward. Had to change the orientation of the plat form original that is getting smaller in back to other way so it is coming wider at the end. Also added new holes to the plate to attach as close as possible. Now I think it will be much better to attach my waterproof bag when travelling. Also better for COG. When I'm able to get the bike out from carage I'll see how it looks in a better picture. If I find better looking top plate might go for that in future, but it is good also as is.
Nice work! This is precisely the reason I bought the webike rack instead of the givi ... it sits further forward and I also thought it looked a little more sturdy.
1 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: No registered users and 3 guests