H2 SX Steering Damper Mounts For ZX-10 Damper

Vendors, please post a thread about your H2SX products here.
Post Reply
User avatar
Pressure Building
Pressure Building
Posts: 80
Joined: Apr 2nd, 2019
x 18
x 33

H2 SX Steering Damper Mounts For ZX-10 Damper

Post by Bryan468 » Fri Jun 28, 2019 7:24 pm

I’ve been talking with Cooters friend who’s working on steering damper mounts and we have set up an arrangement. He’s going to provide mounts that will work with the universal ohlins damper and I’m going to provide mounts that will work with the ZX-10 steering damper.

I do everything by hand so these are fairly time consuming to make. At this point my plan is to make about 10 at a time so availability may be slightly limited.

As far as pricing goes it will depend on powder coating costs and weather the oem H2 damper mount works well with my fork mount setup. This is what I’m thinking for now:

Bare aluminum mounts $200
Black powder coated mounts $225
Aluminum mounts with carbon fiber wrap to wrap yourself $210

One thing to note is that the ZX-10 damper doesn’t provide much resistance unless you have it revalved. It cost me about $100 to have mine done at Kyle racing.

Before I start machining these I would like to know how many are interested in mounts that work with a ZX-10 damper and what finish you would like?

Here’s what the mounts will look like if I don’t use the oem H2 damper mount.
0 x

Vcyclenut zx10 header/full exhaust
Vcyclenut flash
Sprint filter
Pair valve delete
Tial blow off valve
Zx10 revalved steering damper
1/2” bar risers

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: No registered users and 2 guests