Slip On for best sound output
- keith zx
- Accelerating

- Posts: 188
- Joined: Fri Feb 08, 2019 12:33 pm
- Location: south shields uk
- Bike(s): sx1000
- x 1
Re: Slip On for best sound output
I have installed the scorpion serket stainlees slip on, a lot lighter , looks far better ,not a big difference in the sound but the note is a lot deeper , it sounds much better when riding the bike , if you order through this forum you get a 20% reduction a very well made exhaust with a great guarantee.
0 x
- PhukDD
- Accelerating

- Posts: 201
- Joined: Fri Apr 19, 2019 3:24 pm
- Location: Around Phoenix
- Bike(s): a green one
Re: Slip On for best sound output
From what I experienced and have read, you will not get too much of a sound difference with most slip-ons. I do however really like the Akrapovic now that I cut the cat off. You can hear the bike but not deafening loud. https://vimeo.com/342625671
0 x
- keith zx
- Accelerating

- Posts: 188
- Joined: Fri Feb 08, 2019 12:33 pm
- Location: south shields uk
- Bike(s): sx1000
- x 1
Re: Slip On for best sound output
totally agree ,its the cat that is restricting most of the sound from the exhaust , if the cat is removed any slip on will improve the sound ,
0 x
- PhukDD
- Accelerating

- Posts: 201
- Joined: Fri Apr 19, 2019 3:24 pm
- Location: Around Phoenix
- Bike(s): a green one
Re: Slip On for best sound output
https://www.maxtorquecans.com/kawasaki- ... clamp.html mine was 180 delivered to AZ with wide and O2 bung added. Paid on a Monday had the pipe the following Saturday
0 x
- PhukDD
- Accelerating

- Posts: 201
- Joined: Fri Apr 19, 2019 3:24 pm
- Location: Around Phoenix
- Bike(s): a green one
Re: Slip On for best sound output
Going back to the same dyno on Saturday to see how far above 163 whp we got and the video I made there kinda shows you. Before I could hear the gear box now I can hear the exhaust while riding.
0 x
- Snakes709
- Supercharged!

- Posts: 1399
- Joined: Sun Aug 19, 2018 2:42 am
- Location: Edmonton, AB
- Bike(s): 2018 H2 SX SE
- x 11
- x 394
Re: Slip On for best sound output
I went with the zx10r headers and 2016+ zx10r yoshimura 3/4 system. Sounds nice, not to loud below 3800rpm but gets pretty rowdy when you open her up.
0 x
2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler
Who is online
Users browsing this forum: No registered users and 10 guests

