Who's running an aftermarket fuel ECU/piggyback and

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
PhukDD
Accelerating

Accelerating
Posts: 201
Joined: Fri Apr 19, 2019 3:24 pm
Location: Around Phoenix
Bike(s): a green one

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by PhukDD » Mon Jun 17, 2019 2:06 am


Prof J wrote: Sun Jun 16, 2019 10:31 pm
PhukDD wrote: Sun Jun 16, 2019 1:52 pm
PhukDD,

I can see you smiling. Which Sprint filter are you using, Spring P08 or Spring P08 F1?
****************

The F1
DId you play with the stock P08 filter first, or go straight to the F1? I'd suspect to tune into the F1, you'll use a bit more gas with the larger air charge, and get some more HP/TQ as a product.
I have been caught 350 mile from home with nothing but monsoon downpours for 8 hours. I started with the F1 for its water properties https://vimeo.com/73535071
0 x

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:17 am


PhukDD wrote: Mon Jun 17, 2019 2:06 am
I have been caught 350 mile from home with nothing but monsoon downpours for 8 hours. I started with the F1 for its water properties https://vimeo.com/73535071
That's some good rain.

So in addition to your F1 fitler, OEM map, vendor map, custom tune . . . what other power mods have you done to your bike, and do you have any dyno results?

I'm leaning towards the F1 map. It's very close to the same filtration sizing, 5μm larger filter size, but yet 3 times the flow rate of the SP08. So far the F1 seems the least restrictive of the filters for the H2SX that I've found.

I'm interested in hearing more on how you set up your bike.
0 x

\

User avatar
PhukDD
Accelerating

Accelerating
Posts: 201
Joined: Fri Apr 19, 2019 3:24 pm
Location: Around Phoenix
Bike(s): a green one

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by PhukDD » Mon Jun 17, 2019 2:22 am


Prof J wrote: Mon Jun 17, 2019 2:17 am
PhukDD wrote: Mon Jun 17, 2019 2:06 am
I have been caught 350 mile from home with nothing but monsoon downpours for 8 hours. I started with the F1 for its water properties https://vimeo.com/73535071
That's some good rain.

So in addition to your F1 fitler, OEM map, vendor map, custom tune . . . what other power mods have you done to your bike, and do you have any dyno results?

I'm leaning towards the F1 map. It's very close to the same filtration sizing, 5μm larger filter size, but yet 3 times the flow rate of the SP08. So far the F1 seems the least restrictive of the filters for the H2SX that I've found.

I'm interested in hearing more on how you set up your bike.
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
0 x

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:26 am


PhukDD wrote: Mon Jun 17, 2019 2:22 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
You re did the maps yourself, or via a flash map? And if you re ded yourself, what AFR were you looking to map to?

I'm very interested in hearing your after mods dyno next Sat.
0 x

\

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:28 am


Prof J wrote: Mon Jun 17, 2019 2:26 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
You re did the maps yourself, or via a flash map? And if you re ded yourself, what AFR were you looking to map to?

I'm very interested in hearing your after mods dyno next Sat.

If the SX has the air need/capacity for the F1 flow, and your exhaust does not limit the intake, I'd guess you ought go get another 5-10 HP from the F1, maybe a bit more.
0 x

\

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:31 am


Prof J wrote: Mon Jun 17, 2019 2:26 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
You re did the maps yourself, or via a flash map? And if you re did yourself, what AFR were you looking to map to?

I'm very interested in hearing your after mods dyno results next Sat.
[/quote]
0 x

\

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:31 am


Prof J wrote: Mon Jun 17, 2019 2:31 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
You re did the maps yourself, or via a flash map? And if you re did yourself, what AFR were you looking to map to?

I'm very interested in hearing your after mods dyno results next Sat.
0 x

\

User avatar
PhukDD
Accelerating

Accelerating
Posts: 201
Joined: Fri Apr 19, 2019 3:24 pm
Location: Around Phoenix
Bike(s): a green one

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by PhukDD » Mon Jun 17, 2019 2:33 am


Prof J wrote: Mon Jun 17, 2019 2:26 am
PhukDD wrote: Mon Jun 17, 2019 2:22 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
You re did the maps yourself, or via a flash map? And if you re ded yourself, what AFR were you looking to map to?

I'm very interested in hearing your after mods dyno next Sat.
I started with a bench flash map bin file from a tuner then adjusted for this bike using the Woolich software and the log box data.
0 x

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:33 am


Prof J wrote: Mon Jun 17, 2019 2:26 am
PhukDD wrote: Mon Jun 17, 2019 2:22 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
danr slow internet dup post
0 x

\

User avatar
Prof J
Supercharged!

Supercharged!
Posts: 1183
Joined: Wed May 29, 2019 12:02 am
Bike(s): '19 SE +
x 7

Re: Who's running an aftermarket fuel ECU/piggyback and

Post by Prof J » Mon Jun 17, 2019 2:35 am


PhukDD wrote: Mon Jun 17, 2019 2:33 am
Prof J wrote: Mon Jun 17, 2019 2:26 am
PhukDD wrote: Mon Jun 17, 2019 2:22 am
That is it re did the fueling and the ETV maps and took off the limits....dyno is next Saturday so will see there where we ended up.
You re did the maps yourself, or via a flash map? And if you re ded yourself, what AFR were you looking to map to?

I'm very interested in hearing your after mods dyno next Sat.
I started with a bench flash map bin file from a tuner then adjusted for this bike using the Woolich software and the log box data.
Woolich seems the unit for this bikes best health/tuning.

Yes, from your data log. How'd/what'd the data log/software suggest to change your fueling, in terms of AFR?
0 x

\

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests