Turn Signal
Turn Signal
Hey guys I noticed that the turn signal wire was cut while riding. I spliced it back together but it still doesn’t work. Any ideas? Fuse? Any idea which one? Pics included. Many thanks z
0 x
Re: Turn Signal
Take the cover off of the fuse box, and you can look at them to figure out which one (if any) is blown.
Cut that zip tie on the wire also. That shouldn't be there. My turn signal wire is completely under the front fairing. Good chance that is what damaged the wire when you turned the bars to the right.
Cut that zip tie on the wire also. That shouldn't be there. My turn signal wire is completely under the front fairing. Good chance that is what damaged the wire when you turned the bars to the right.
0 x
-
Champ87
- Supercharged!
- Posts: 1289
- Joined: Mon Apr 09, 2018 1:43 am
- Location: NW Indiana US
- Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E, '74 Bultaco 250 Pursang
- x 303
- x 554
Re: Turn Signal
Fuse Box shown in your pic (Fuse Box 2) doesn't hold Turn Signal Fuse. You need Fuse Box 3 - it's a single fuse holder located in the left side nose, near the Accessory Socket. No need to remove the fairing - just remove the black trim cover to get to it.
0 x
Champ87
It's amazing how fast you can go when you take your time.
Who is online
Users browsing this forum: No registered users and 66 guests
