Oil in the intake! HELP!

[Snakes709]

$350 Canadian! For 5qts and filters?! Plus labor

No, 350 included oil change, chain adjustment, coolant and brake inspection/fluid top up, supercharger axial play and a few other small inspections. Have no problem doing my own work. It was just because i was going on a trip and wanted everything done by the time i got back.

[JonTheChron]

Got my first service done at the dealership, 175$ Canadian

[Drnick]

.742 exchange rate= $350 can = approximately $260? US
Ok, just wanna clear up that confusion

[ScottyB]

Mine was $360 can...a bit of a rip off!
I will do the servicing from now on thanks ;)

[hypertourer]

Finally opened up my 2019 sxse + today after 4500 miles to do axial play check on the supercharger and to clean the filter there was a little bit of oil not as much as terrordbn's. But not a big deal however, there was a black smudge on of the impellers's and I am concerned. Any ideas what that might have been and what caused. There are no chips or dents on rest of the superdharger. Thanks.

[vcyclenut]

Finally opened up my 2019 sxse + today after 4500 miles to do axial play check on the supercharger and to clean the filter there was a little bit of oil not as much as terrordbn's. But not a big deal however, there was a black smudge on of the impellers's and I am concerned. Any ideas what that might have been and what caused. There are no chips or dents on rest of the superdharger. Thanks.

have a pick of the smudge?

how was the play?

[danham]

Finally opened up my 2019 sxse + today after 4500 miles to do axial play check on the supercharger and to clean the filter there was a little bit of oil not as much as terrordbn's. But not a big deal however, there was a black smudge on of the impellers's and I am concerned. Any ideas what that might have been and what caused. There are no chips or dents on rest of the superdharger. Thanks.

It's been a while since I had mine apart for air filter installation, but I seem to recall a black magic marker line drawn on one of the impeller blades, perhaps part of balancing during assembly? If that got exposed to some solvent, such as oil or gas, it could "smudge."

-dan

[zxhoya]

Yeah, there is a black mark on all of them (H2 SX's) from the factory. Pretty sure it's been discussed here on this forum.

[Champ87]

Yeah, there is a black mark on all of them (H2 SX's) from the factory. Pretty sure it's been discussed here on this forum.

Like this....

[hypertourer]

Axial play was within tolerance .01mm. Thanks for putting me at ease with the smudge on the impeller. I will button everything back up and get back on my social distancing machine and ride on.