Peg Scrape

[Raddy47]

Well today I scraped my right peg in a turn at about 70-75mph and simultaneously felt ever so slightly the ground on my knee. Scared the crap out of me since I don’t wear knee sliders. I try not to push it to far because of that. Guess I was farther over than I thought. A lighter spot now appears on right knee.

[black-k1]

Well done on the scrape! What's the new "high score" on the lean angle recorder?

[Raddy47]

Only 47??? To be honest my lean angle sensors have always felt off. From the get go. But maybe it’s correct. The turn was up a gentle slope so on flat ground probably more. But that turn is the most aggressive close to me. And I went on two fifteen minute rides after finishing all the work I did. Feeling it scrape was a rush though.

[A_MAC]

I think I remember reading somewhere that the lean gauge maxes out at 47°, so it's very possible you dipped farther than that!

[Snakes709]

I think I remember reading somewhere that the lean gauge maxes out at 47°, so it's very possible you dipped farther than that!

I had mine read 81*

[Kwee]

I hit 53 and 54. My pegs are still brand new. But my suspensions are set stiffer than stock so maybe a little bit more of ground clearance.

[Raddy47]

Good call Kwee. I was in rider mode with suspension set to normal and no damper settings adjusted. And going up hill in a turn. Definitely feels different than sport mode especially without any assists on.

When does the lean angle reset? Could be mind games but I swear I’ve seen it go back down to around 25-27 on start ups before.

[Kwee]

Good call Kwee. I was in rider mode with suspension set to normal and no damper settings adjusted. And going up hill in a turn. Definitely feels different than sport mode especially without any assists on.

When does the lean angle reset? Could be mind games but I swear I’ve seen it go back down to around 25-27 on start ups before.

If you reset all when you reset the trip that's erase everything. You have to select trip A and trip B and reset both.