Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
-
uktotty
- New Member

- Posts: 9
- Joined: Fri Jun 25, 2021 8:39 am
- Location: Berkshire
- Bike(s): H2SX CBR1100
- x 1
- x 4
Post
by uktotty » Thu Jul 15, 2021 9:10 am
1 x
-
JaseG
- Boost Engaged

- Posts: 82
- Joined: Thu Jul 02, 2020 7:56 pm
- Location: East Yorkshire
- Bike(s): H2 SX SE+ ('20) / S1000R ('17)
- x 15
- x 28
Post
by JaseG » Thu Jul 15, 2021 12:51 pm
That location is not an option on the SE+
-
Attachments
-

0 x
-
uktotty
- New Member

- Posts: 9
- Joined: Fri Jun 25, 2021 8:39 am
- Location: Berkshire
- Bike(s): H2SX CBR1100
- x 1
- x 4
Post
by uktotty » Thu Jul 15, 2021 3:07 pm
Oooh you have a special box of tricks in there. Is that the Bluetooth unit?
0 x
-
JaseG
- Boost Engaged

- Posts: 82
- Joined: Thu Jul 02, 2020 7:56 pm
- Location: East Yorkshire
- Bike(s): H2 SX SE+ ('20) / S1000R ('17)
- x 15
- x 28
Post
by JaseG » Thu Jul 15, 2021 8:31 pm
Nope. The Bluetooth unit is part of the dash.
That I believe from looking at the parts fiche is the KECS electronic control unit.
0 x
-
soulreaver993
- Boost Engaged

- Posts: 39
- Joined: Mon Sep 06, 2021 9:40 am
- Location: Newport News VA
- Bike(s): 2018 H2SX
- x 12
- x 14
Post
by soulreaver993 » Wed Sep 08, 2021 5:50 pm
Sick as Hell. Just bought it off of Revzilla.
Installed right side fairing. Perfect fit.
0 x
David {Poseidon} Carlson
SEC
Endangered Species MC
Hampton Roads Virginia, U.S.A.
H2SX-R
Yoshi Alpha
Cat Delete
Woolich Racing package (Autotuned)
HP Report: Pending
-
michaelkeay
- New Member

- Posts: 6
- Joined: Sun Oct 23, 2022 12:54 pm
- Location: Uk
- Bike(s): H2sx 2022
- x 2
Post
by michaelkeay » Wed Feb 15, 2023 11:00 pm
uktotty wrote: Mon Jul 05, 2021 4:30 pm
So I installed mine on Friday and I noted the instructions about the compressor being UPRIGHT or a few degrees off upright, so I went with this install.
Compressor under the seat to the right of the battery, no cutting, sawing, or drilling involved.
Horn on the left side of the front fairing to allow use of the curved side of the horn to fit the curved frame tube.
Relay was mounted on a screw on the earth point at the back of the battery compartment.
Smart install mate. How is the compressor fixed? Or is it just tucked down there? Did you have to remove any plastics to route the hose between compressor and horn? Cheers
0 x
-
Iain
- Supercharged!

- Posts: 244
- Joined: Tue Aug 16, 2022 12:42 pm
- Location: England
- Bike(s): H2 SX SE+(daily) RD 350 LC(still in shipping crate!), ZZR1400(RIP+TREE) ZXR6 (track), R1M (track)
- x 79
- x 77
Post
by Iain » Thu Mar 16, 2023 10:04 pm
JaseG wrote: Thu Jul 15, 2021 12:51 pm
That location is not an option on the SE+
I've put my compressor on the right fairing and am currently working on a good safe place for the horn. I have the SE+ as well
0 x
2020 H2 SX SE+ (Mazikeen/Maze)
Vandemon H2R full system
P08 filter
Kawasaki sliders
Home made tail tidy and lights
Fog lights
Driven block off plates
-
Miamijato
- Boost Engaged

- Posts: 92
- Joined: Wed Oct 23, 2019 1:20 pm
- Location: Miami
- Bike(s): 2019 Ninja H2 SXSE+
- x 41
- x 8
Post
by Miamijato » Fri Mar 17, 2023 9:23 pm
soulreaver993 wrote: Wed Sep 08, 2021 5:50 pm
Sick as Hell. Just bought it off of Revzilla.
Installed right side fairing. Perfect fit.
20210909_152844.jpg
right side fairing is where it goes......t
0 x
Who is online
Users browsing this forum: No registered users and 108 guests