Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
-
JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Post
by JonTheChron » Sun Sep 08, 2019 10:33 pm
pyrax wrote: Sun Sep 08, 2019 8:14 pm
hey Bryan I know you said you weren't looking to sell, but would you consider it for the people who would play for it? I personally would love to have this kit! Thanks again!
He is selling.
I have purchased a set from him in powdercoated Black - I should have it on hand in a few days. Try and reach him on facebook, it might be quicker.
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
-
Bryan468
- Supercharged!

- Posts: 433
- Joined: Tue Apr 02, 2019 7:52 pm
- x 35
- x 86
Post
by Bryan468 » Sun Sep 08, 2019 10:38 pm
pyrax wrote: Sun Sep 08, 2019 8:14 pm
hey Bryan I know you said you weren't looking to sell, but would you consider it for the people who would play for it? I personally would love to have this kit! Thanks again!
I did decide to make a batch to sell. I have about 5 sets left. If you’re interested you can pm me here or on fb.
0 x
-
Prof J
- Supercharged!

- Posts: 1183
- Joined: Wed May 29, 2019 12:02 am
- Bike(s): '19 SE +
- x 7
Post
by Prof J » Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
0 x
\
-
JonTheChron
- Supercharged!

- Posts: 539
- Joined: Sun Dec 10, 2017 9:00 pm
- Location: Quebec
- Bike(s): H2 SX SE '18
- x 7
- x 6
Post
by JonTheChron » Mon Sep 09, 2019 8:49 pm
Prof J wrote: Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
In my case, I have been going to the dragstrip alot lately, and I just want reassurance, wobble at 160mph isn't too fun.
0 x
2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)
-
Snakes709
- Supercharged!

- Posts: 1396
- Joined: Sun Aug 19, 2018 2:42 am
- Location: Edmonton, AB
- Bike(s): 2018 H2 SX SE
- x 11
- x 387
Post
by Snakes709 » Mon Sep 09, 2019 10:31 pm
Prof J wrote: Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
Starting to get back to the track and with the extra power added, a damper is a good piece of insurance. I been in a wobble at 156kmh on the track and its scary as fuck. Went i to a small wobble on my sx/se in stock form due to uneven pavement. The bike should have come with one.
0 x
2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler
-
Bryan468
- Supercharged!

- Posts: 433
- Joined: Tue Apr 02, 2019 7:52 pm
- x 35
- x 86
Post
by Bryan468 » Tue Sep 10, 2019 12:29 am
Prof J wrote: Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
For me a steering damper is among the first mods I do to a bike and the reason for that is because I had a fairly bad accident due to death wobble. I know some people will argue that they don’t ride hard enough to need one.
Well I was going 30 mph on a rustic road and crested the top of a hill and somehow upset the front end and started the shake. Next thing you know I wake up in the hospital with a nurse asking me if I know where I am!
I look at the damper as a added layer of safety and when I’m about to do something stupid I just turn that dial up and know the front end is going to be solid.
0 x
-
Tonyph2sxse
- New Member

- Posts: 19
- Joined: Sun Apr 28, 2019 5:37 pm
- Location: Temecula
- Bike(s): H2SX SE, FJR1300
- x 1
Post
by Tonyph2sxse » Thu Sep 12, 2019 4:49 pm
I would like one. Let me know how to purchase the mounting kit.
0 x
-
fatsingleguy
- New Member

- Posts: 15
- Joined: Mon Jun 24, 2019 4:17 pm
- Location: 85338
- Bike(s): 2018 H2 SX SE, 2014 HD FLHX
Post
by fatsingleguy » Sat Sep 14, 2019 2:42 pm
I too would like to purchase!! Send me a bill as soon as you can!!
0 x
-
Prof J
- Supercharged!

- Posts: 1183
- Joined: Wed May 29, 2019 12:02 am
- Bike(s): '19 SE +
- x 7
Post
by Prof J » Sun Sep 15, 2019 1:04 am
Bryan, I would like a setup as well. I've PM'd you for details.
Thank you.
0 x
\
-
Vex
- Supercharged!

- Posts: 1501
- Joined: Sun Sep 08, 2019 5:19 pm
- Location: Washington
- Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
- x 380
- x 417
Post
by Vex » Sat Oct 12, 2019 8:43 pm
Got the damper mounted after nearly having a tank slapper the other day (Wasn't even going crazy; speed limit of all things, and a lane change). Thank you for the bracket! Makes a world of difference.

- Mounted
0 x
2018 H2 SX SE
BAM Performance GP Shift
Brock's Penta Exhaust
DNA Filter
Yagerworks Intercooler
Stage 2 SC
Tuned by 2WDW
Dyno: 255rwhp
Who is online
Users browsing this forum: No registered users and 71 guests