*Updated* Mounted ZX-10 steering damper

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
JonTheChron
Medium Boost
Medium Boost
Posts: 541
Joined: Dec 10th, 2017
Location: Quebec
Bike(s): H2 SX SE '18
Website: http://supercharged.ninja
x 137
x 162

Re: Mounted ZX-10 steering damper

Post by JonTheChron » Sun Sep 08, 2019 10:33 pm


pyrax wrote:
Sun Sep 08, 2019 8:14 pm
hey Bryan I know you said you weren't looking to sell, but would you consider it for the people who would play for it? I personally would love to have this kit! Thanks again!
He is selling.

I have purchased a set from him in powdercoated Black - I should have it on hand in a few days. Try and reach him on facebook, it might be quicker.
0 x

2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)

User avatar
Bryan468
Low Boost
Low Boost
Posts: 187
Joined: Apr 2nd, 2019
x 70
x 138

Re: Mounted ZX-10 steering damper

Post by Bryan468 » Sun Sep 08, 2019 10:38 pm


pyrax wrote:
Sun Sep 08, 2019 8:14 pm
hey Bryan I know you said you weren't looking to sell, but would you consider it for the people who would play for it? I personally would love to have this kit! Thanks again!
I did decide to make a batch to sell. I have about 5 sets left. If you’re interested you can pm me here or on fb.
0 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, 1/2” bar spacers, turbo smart bov, Scott’s steering damper, Adams extended swing arm, custom led integrated tail light, tail section block off panels, water meth injection, oil catch can.

User avatar
Prof J
Chirp-Chirp!
Chirp-Chirp!
Posts: 796
Joined: May 29th, 2019
Bike(s): '19 SE +
x 120
x 134

Re: *Updated* Mounted ZX-10 steering damper

Post by Prof J » Mon Sep 09, 2019 8:23 pm


For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
1 x

\

User avatar
JonTheChron
Medium Boost
Medium Boost
Posts: 541
Joined: Dec 10th, 2017
Location: Quebec
Bike(s): H2 SX SE '18
Website: http://supercharged.ninja
x 137
x 162

Re: *Updated* Mounted ZX-10 steering damper

Post by JonTheChron » Mon Sep 09, 2019 8:49 pm


Prof J wrote:
Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
In my case, I have been going to the dragstrip alot lately, and I just want reassurance, wobble at 160mph isn't too fun.
1 x

2018 H2 SX SE (1st in Canada)
2011 Ninja 1000 (sold)
2009 Ninja 250R (sold)

User avatar
Snakes709
Medium Boost
Medium Boost
Posts: 587
Joined: Aug 19th, 2018
Location: Edmonton, AB
Bike(s): 2018 H2 SX SE
x 13
x 206

Re: *Updated* Mounted ZX-10 steering damper

Post by Snakes709 » Mon Sep 09, 2019 10:31 pm


Prof J wrote:
Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
Starting to get back to the track and with the extra power added, a damper is a good piece of insurance. I been in a wobble at 156kmh on the track and its scary as fuck. Went i to a small wobble on my sx/se in stock form due to uneven pavement. The bike should have come with one.
1 x

2018 H2 SX/SE
-ZX10R Headers
-2016+ ZX10R Yoshimura Alpha 3/4 system
-Sprint P08 Filter
-Vcyclenut flash
-Driven block off plates
-Yager Werx Intercooler
208whp 96tq

User avatar
Bryan468
Low Boost
Low Boost
Posts: 187
Joined: Apr 2nd, 2019
x 70
x 138

Re: *Updated* Mounted ZX-10 steering damper

Post by Bryan468 » Tue Sep 10, 2019 12:29 am


Prof J wrote:
Mon Sep 09, 2019 8:23 pm
For you folks installing one of these units, what is your primary (and secondary?) reason to do so? Do you feel there is a mechanical 'need' , something Kawasaki missed, for this unit based upon the bikes' functioning?
For me a steering damper is among the first mods I do to a bike and the reason for that is because I had a fairly bad accident due to death wobble. I know some people will argue that they don’t ride hard enough to need one.

Well I was going 30 mph on a rustic road and crested the top of a hill and somehow upset the front end and started the shake. Next thing you know I wake up in the hospital with a nurse asking me if I know where I am!

I look at the damper as a added layer of safety and when I’m about to do something stupid I just turn that dial up and know the front end is going to be solid.
1 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, 1/2” bar spacers, turbo smart bov, Scott’s steering damper, Adams extended swing arm, custom led integrated tail light, tail section block off panels, water meth injection, oil catch can.

User avatar
Tonyph2sxse
Starting Engine
Starting Engine
Posts: 9
Joined: Apr 28th, 2019
Location: Temecula
Bike(s): H2SX SE, FJR1300
x 21
x 1

Re: *Updated* Mounted ZX-10 steering damper

Post by Tonyph2sxse » Thu Sep 12, 2019 4:49 pm


I would like one. Let me know how to purchase the mounting kit.
1 x

User avatar
fatsingleguy
14.7 psi
14.7 psi
Posts: 12
Joined: Jun 24th, 2019
Location: 98270
Bike(s): 2018 H2 SX SE, 2014 HD FLHX
x 10

Re: *Updated* Mounted ZX-10 steering damper

Post by fatsingleguy » Sat Sep 14, 2019 2:42 pm


I too would like to purchase!! Send me a bill as soon as you can!!
1 x

User avatar
Prof J
Chirp-Chirp!
Chirp-Chirp!
Posts: 796
Joined: May 29th, 2019
Bike(s): '19 SE +
x 120
x 134

Re: *Updated* Mounted ZX-10 steering damper

Post by Prof J » Sun Sep 15, 2019 1:04 am


Bryan, I would like a setup as well. I've PM'd you for details.

Thank you.
1 x

\

User avatar
Vex
Accelerating
Accelerating
Posts: 221
Joined: Sep 8th, 2019
Location: Seattle
Bike(s): 2018 H2 SX SE, 2011 ZX-6R, 2017 Z125
x 116
x 68

Re: *Updated* Mounted ZX-10 steering damper

Post by Vex » Sat Oct 12, 2019 8:43 pm


Got the damper mounted after nearly having a tank slapper the other day (Wasn't even going crazy; speed limit of all things, and a lane change). Thank you for the bracket! Makes a world of difference.
IMG_20191012_123652.jpg
Mounted
1 x

2018 Kawasaki H2 SX SE
2017 Kawasaki Z125 Pro
2011 Kawasaki ZX-6R

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: No registered users and 36 guests