Smart Turn Signal - feedback anyone

Discuss apparel, gear, and tech for your rides.
User avatar
prettybirdSE
Chirp-Chirp!
Chirp-Chirp!
Posts: 521
Joined: Sat Aug 15, 2020 7:30 pm
Location: Montana
Bike(s): 2020 Ninja H2SE+
Website: https://www.youtube.com/channel/UCrrfbd ... V1aczGuzug
x 34
x 21

Re: Smart Turn Signal - feedback anyone

Post by prettybirdSE » Wed Jun 02, 2021 9:23 pm


Now that's an excellent way to do it.I haven't installed mine for that very reason.I don't want to cut anything either.I might give those a shot as well....thanks.
0 x

User avatar
Champ87
Supercharged!
Supercharged!
Posts: 757
Joined: Mon Apr 09, 2018 1:43 am
Location: NW Indiana US
Bike(s): Current bikes: 2018 H2 SX SE, '73 Yamaha RD350, '74 Kawasaki H1E
x 4
x 17

Re: Smart Turn Signal - feedback anyone

Post by Champ87 » Thu Jun 03, 2021 2:55 am


bw03 wrote:
Wed Jun 02, 2021 8:20 pm
Not keen on cutting up the wires on the bike for this install so i got some connectors to make it "plug and play".
That's exactly what I did when I installed the keyless ignition system on my bike. I didn't want to cut into the stock wiring so I grabbed a couple of OEM connectors and made up a short bridging harness to tap into the kill switch wiring. The right handlebar switch uses a 6-way connector. It worked a treat but in the end I may have been better off using Posi-Tap connectors and saved myself a bunch of work.

I also had to hook up to the turn signals, but the lack of turn signal relay meant that tapping into that left handlebar connector wouldn't function the way I needed so I had to find a different answer.

20181224_4815.jpg
0 x

Champ87
It's amazing how fast you can go when you take your time.

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: divine2069 and 8 guests