Page 1 of 1

Length of H2SX Woodcraft frame slider

Posted: Wed Jun 12, 2019 9:50 pm
by Prof J
Can't find the dimension on vcyclenut's web site.

Not counting the threaded shaft, can someone please tell me the length of the H2SX Woodcraft frame sliders, both left and right side?

Thank you.

Re: Length of H2SX Woodcraft frame slider

Posted: Fri Jun 14, 2019 2:36 am
by stk0308
I don't know what threaded shaft you think is involved. It attaches via a through bolt that replaces the upper engine(head really) to frame mount bolt. The frame sliders as installed are:
left: 3.5 inches long
right: 3 inches long

Measured from the frame to the end of the delrin slider that would impact the ground.

Re: Length of H2SX Woodcraft frame slider

Posted: Fri Jun 14, 2019 3:15 am
by Prof J
stk0308 wrote:
Fri Jun 14, 2019 2:36 am
I don't know what threaded shaft you think is involved. It attaches via a through bolt that replaces the upper engine(head really) to frame mount bolt. The frame sliders as installed are:
left: 3.5 inches long
right: 3 inches long

Measured from the frame to the end of the delrin slider that would impact the ground.
stk0308, thanks. The photo on the website seemed to show the puck threaded bolt being constructed to thread into the frame.

Got it, it will be an engine mounting orifice.

Re: Length of H2SX Woodcraft frame slider

Posted: Fri Jun 14, 2019 3:16 am
by Prof J
Prof J wrote:
Fri Jun 14, 2019 3:15 am
stk0308 wrote:
Fri Jun 14, 2019 2:36 am
I don't know what threaded shaft you think is involved. It attaches via a through bolt that replaces the upper engine(head really) to frame mount bolt. The frame sliders as installed are:
left: 3.5 inches long
right: 3 inches long

Measured from the frame to the end of the delrin slider that would impact the ground.
stk0308, thanks for the info. The photo on the website seemed to show the puck threaded bolt being constructed to thread into the frame.

Got it, it will be an engine mounting orifice.