Do I need a resistor??

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
Post Reply
User avatar
David158667
Boost Engaged
Boost Engaged
Posts: 22
Joined: Thu Dec 02, 2021 5:21 pm
Location: Toronto
Bike(s): 2018 H2 SX SE, 2005 Kawi Z750S
x 36
x 4

Do I need a resistor??

Post by David158667 » Sat May 14, 2022 2:04 pm


Looking for a little advise...

I installed the Motogadget MO.Blaze Pin turn signal lights and now it seems like I have the engine light shining in my dash.
Full disclosure as well, I also installed (replaced) my 12V socket with a USB socket.

All I did was attached the new lights to the old wires but with them both being LED lights, I thought it would be okay. There was no resistor that came with the lights and the lights including the flashing work amazingly.

Could this be the cause of the engine light???

From their website:
Power consumption: about 3 Watt


Thanks,
Attachments
20220413_095826.jpg
20220413_100019[1].jpg
0 x

User avatar
David158667
Boost Engaged
Boost Engaged
Posts: 22
Joined: Thu Dec 02, 2021 5:21 pm
Location: Toronto
Bike(s): 2018 H2 SX SE, 2005 Kawi Z750S
x 36
x 4

Re: Do I need a resistor??

Post by David158667 » Sat May 14, 2022 11:26 pm


Update... I wanted to delete this post but I thought it would be a good thing to keep people posted... after a good long ride today with a few stops, check engine light has turned off and has not come back on. These Gotogadget pin lights are amazingly bright.
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: Snakes709 and 22 guests