Diameter of the headstock hole

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
Post Reply
User avatar
Philip Morgan
Starting Engine
Starting Engine
Posts: 6
Joined: Fri Apr 15, 2022 12:15 pm
Location: Andorra
Bike(s): BMW K1, BMW R90S, BMW HP2 Sport, BMW R1200GSA, BMW K1300S
x 1
x 4

Diameter of the headstock hole

Post by Philip Morgan » Fri May 13, 2022 5:23 pm


Has anyone measured the diameter of the hole in the headstock. I intend fitting a Ram mount to which I'll attach my SatNav. I've found one with a 19mm diameter which you expand using a screw. Will this fit in the hole?
0 x

User avatar
danham
Medium Boost
Medium Boost
Posts: 307
Joined: Sat Mar 02, 2019 6:40 pm
Location: Cape Cod, MA USA
Bike(s): 2018 SE
x 35
x 43

Re: Diameter of the headstock hole

Post by danham » Fri May 13, 2022 10:04 pm


If I had seen this in time, I could have measured today, but this may help. Here is the correct RAM stem mount for our bikes:

https://www.rammount.com/search?query=B-342

To see why I could have measured today:

viewtopic.php?f=2&p=25886#p25886

-dan
0 x

2018 H2 SX SE
Sprint P08 filter
Skene P3 rear LEDs
Skene Photon Blaster front LEDs
Woodcraft frame sliders
Nelson Rigg tail bag

User avatar
wyso
Pressure Building
Pressure Building
Posts: 55
Joined: Thu Jul 05, 2018 12:41 am
Location: Upstate NY
Bike(s): H2SXSE Z9000rs ThruxtonRS
x 2
x 5

Re: Diameter of the headstock hole

Post by wyso » Sat May 14, 2022 12:46 am


Kawasaki makes a GPS mount
0 x

User avatar
Philip Morgan
Starting Engine
Starting Engine
Posts: 6
Joined: Fri Apr 15, 2022 12:15 pm
Location: Andorra
Bike(s): BMW K1, BMW R90S, BMW HP2 Sport, BMW R1200GSA, BMW K1300S
x 1
x 4

Re: Diameter of the headstock hole

Post by Philip Morgan » Sat May 14, 2022 1:51 pm


danham wrote:
Fri May 13, 2022 10:04 pm
If I had seen this in time, I could have measured today, but this may help. Here is the correct RAM stem mount for our bikes:

https://www.rammount.com/search?query=B-342

To see why I could have measured today:

viewtopic.php?f=2&p=25886#p25886

-dan
Yes you are right. I went round to Cradley Kawasaki today and measured it from aniother customers bike in the showroom - 16mm - so that is the right RAM mount and I've just ordered it. Picking my bike up in about 2 weeks.
1 x

User avatar
wyso
Pressure Building
Pressure Building
Posts: 55
Joined: Thu Jul 05, 2018 12:41 am
Location: Upstate NY
Bike(s): H2SXSE Z9000rs ThruxtonRS
x 2
x 5

Re: Diameter of the headstock hole

Post by wyso » Sat May 14, 2022 2:55 pm


195NAE0003
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: Bing [Bot] and 26 guests