Oil Catch Can Kit

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
prettybirdSE
Low Boost
Low Boost
Posts: 169
Joined: Aug 15th, 2020
x 88
x 36

Re: Oil Catch Can Kit

Post by prettybirdSE » Mon Aug 17, 2020 6:19 pm


Well I'm just wondering WHY there would be excessive oil in the airbox.It would be normal to have a small amount in there with more agressive riding,but just regular riding and cruising?In no way am I trying to undermine what you're doing.I plan on getting a few things from you up ahead.I'm just wondering about the blowby.That it would need a receptacle bigger than the factory catch bottle.
0 x

User avatar
Bryan468
Supercharged!
Supercharged!
Posts: 265
Joined: Apr 2nd, 2019
x 96
x 211

Re: Oil Catch Can Kit

Post by Bryan468 » Mon Aug 17, 2020 8:17 pm


prettybirdSE wrote:
Mon Aug 17, 2020 6:19 pm
Well I'm just wondering WHY there would be excessive oil in the airbox.It would be normal to have a small amount in there with more agressive riding,but just regular riding and cruising?In no way am I trying to undermine what you're doing.I plan on getting a few things from you up ahead.I'm just wondering about the blowby.That it would need a receptacle bigger than the factory catch bottle.
I have a couple ideas why....

Boosted and nitrous engines require a larger end gap on the piston rings which results in more blow by than naturally aspirated engines. The crankcase vent hose is about 6” long and the outlet is right next to the supercharger inlet. I don’t believe the supercharger is pulling a vacuum on the crankcase but I do believe it’s helping to draw the oil out of the crankcase.

Also, I’m not simply replacing the catch bottle with a bigger one. With the catch can kit the airbox is sealed off where the crankcase vent hose goes through and the crank case is then vented through the catch can. This way there is no way for the crank case oil to make it into the airbox, plenum, combustion chamber, ect... via the crank case vent.
3 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, ABM bars, turbo smart bov, Scotts steering damper, Adams extended swing arm, integrated tail light, tail section block off panels, water meth injection, oil catch can, e85 cont. analyzer

User avatar
Tonyph2sxse
Boost Engaged
Boost Engaged
Posts: 20
Joined: Apr 28th, 2019
Location: Temecula
Bike(s): H2SX SE, FJR1300
x 40
x 7

Re: Oil Catch Can Kit

Post by Tonyph2sxse » Thu Oct 01, 2020 3:41 pm


1601566706333946929062548578599.jpg
16015666468316983143851549531155.jpg
Bryan468 please count me in for the catch can kit. I'm getting tired of cleaning my sprint filter after every couple of rides.
Just info for other owner's, I have a sprint filter, full exhaust system (penta carbon) from Brock's Performance and tuning from Brock's Performance. These mods come with an abundance of additional power. They also come with higher rev limits. So any spirited riding will definitely cause oil blow by to infiltrate the airbox. I pay close attention to the small clear airbox drain tube. It fills with oil after a couple of rides. I pull the filter and clean the airbox and the filter. I presently have just over 10,000 miles on the bike.
1 x

User avatar
Bryan468
Supercharged!
Supercharged!
Posts: 265
Joined: Apr 2nd, 2019
x 96
x 211

Re: Oil Catch Can Kit

Post by Bryan468 » Fri Oct 02, 2020 6:28 pm


Tonyph2sxse wrote:
Thu Oct 01, 2020 3:41 pm
1601566706333946929062548578599.jpg16015666468316983143851549531155.jpgBryan468 please count me in for the catch can kit. I'm getting tired of cleaning my sprint filter after every couple of rides.
Just info for other owner's, I have a sprint filter, full exhaust system (penta carbon) from Brock's Performance and tuning from Brock's Performance. These mods come with an abundance of additional power. They also come with higher rev limits. So any spirited riding will definitely cause oil blow by to infiltrate the airbox. I pay close attention to the small clear airbox drain tube. It fills with oil after a couple of rides. I pull the filter and clean the airbox and the filter. I presently have just over 10,000 miles on the bike.
I’ll add you to the list. I just finished up making the mounting brackets last week. I still have a lot of work to do to put everything together though. I’m hoping to have them available by November.

Image
2 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, ABM bars, turbo smart bov, Scotts steering damper, Adams extended swing arm, integrated tail light, tail section block off panels, water meth injection, oil catch can, e85 cont. analyzer

User avatar
78cobra
Pressure Building
Pressure Building
Posts: 64
Joined: Nov 23rd, 2019
Location: Midwest
Bike(s): 1988 Yamaha FZR1000, 1994 Yamaha FZR1000, 2018 Kawasaki H2 sx
x 48
x 25

Re: Oil Catch Can Kit

Post by 78cobra » Sun Oct 11, 2020 8:09 pm


Haven't been in the site for a little bit. I hope its not to late to be put in for the catch can
0 x

88 & 94 FZR1000 piped sprocket jetted V&H PowerPak
18 H2sx zx10r header arrow mid V&H slipon scott damper vcyclenut tune 200rwhp
78 mustang cobra 302
85 mustang gt 302, HCI 3.55 holset turbo
04 bmw 645ci
05 subaru baja turbo
92 honda civic

User avatar
Bryan468
Supercharged!
Supercharged!
Posts: 265
Joined: Apr 2nd, 2019
x 96
x 211

Re: Oil Catch Can Kit

Post by Bryan468 » Sun Oct 11, 2020 9:00 pm


78cobra wrote:
Sun Oct 11, 2020 8:09 pm
Haven't been in the site for a little bit. I hope its not to late to be put in for the catch can
I’ll add you to the list.
1 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, ABM bars, turbo smart bov, Scotts steering damper, Adams extended swing arm, integrated tail light, tail section block off panels, water meth injection, oil catch can, e85 cont. analyzer

User avatar
dehaile
Supercharged!
Supercharged!
Posts: 52
Joined: Jun 2nd, 2018
Location: TX
Bike(s): H2SX SE +
x 23
x 34

Re: Oil Catch Can Kit

Post by dehaile » Sat Oct 17, 2020 5:27 pm


Add me too! thanks
0 x

User avatar
Bryan468
Supercharged!
Supercharged!
Posts: 265
Joined: Apr 2nd, 2019
x 96
x 211

Re: Oil Catch Can Kit

Post by Bryan468 » Sat Oct 17, 2020 6:33 pm


dehaile wrote:
Sat Oct 17, 2020 5:27 pm
Add me too! thanks
You’re on the list.
1 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, ABM bars, turbo smart bov, Scotts steering damper, Adams extended swing arm, integrated tail light, tail section block off panels, water meth injection, oil catch can, e85 cont. analyzer

User avatar
snakeeyes
Starting Engine
Starting Engine
Posts: 8
Joined: Oct 21st, 2020
Location: The Republic of Texas
Bike(s): Yes
x 6
x 12

Re: Oil Catch Can Kit

Post by snakeeyes » Wed Oct 21, 2020 7:59 pm


Please add me as well if you would. I'm new here but the original owner of the bike I just bought has, I believe, a couple of your mods installed on it, and the quality is impressive.
0 x

2018 H2 SX SE, Vcyclenut flash, ZX-10/Yoshi exhaust, Sprint filter, Ohlins steering damper, Powerbronze rear cowl and tint windscreen, Sargent seat, Xpel paint film, ceramic paint coating, tail tidy, integrated brake light/turn signals...223 rwhp

User avatar
CiscoKid
Supercharged!
Supercharged!
Posts: 52
Joined: Sep 17th, 2020
Location: West Coast Canada
Bike(s): 20 H2 SX SE/96 ZX1100D/2000ZX-9R
x 15
x 17

Re: Oil Catch Can Kit

Post by CiscoKid » Thu Oct 22, 2020 3:11 am


Please add me on the list I would like to purchase this as well. I will also be in touch for your riser kit and bracket
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: motoman, prettybirdSE and 41 guests