Murph's bar riser design update #3

Bike aesthetic/mechanical/electrical modifications and general wrenching advice.
User avatar
UFO
Medium Boost
Medium Boost
Posts: 356
Joined: Nov 30th, 2017
Location: PNW, USA
Bike(s): '18 H2SX SE
x 53
x 244

Re: Murph's bar riser design update #3

Post by UFO » Thu Aug 22, 2019 5:57 pm


FJR919 wrote:
Thu Aug 22, 2019 5:11 pm
Any updates?
Someone asked the same thing on facebook (maybe you?). Here was my reply there:
Still waiting on more machining. I worked as a design engineer in the tech industry for 25 years. If I had my own 3D printing and machining capability this would have been a 2 week job...from first design to being ready for production, not a 5 month job. I volunteered to do the CAD work, everything else is outside my control. /shrug
:bash:
1 x

Various... ➡ 2000 Hayabusa ➡ 2002 VFR ➡ 2003 FJR1300 ➡ 2010 Multistrada ➡ 2018 H2SX SE #510 "Godzilla"

User avatar
HaraldB
Pressure Building
Pressure Building
Posts: 78
Joined: Sep 3rd, 2018
Location: Germany
Bike(s): H2 SX SE
x 18
x 20

Re: Murph's bar riser design update #3

Post by HaraldB » Thu Aug 22, 2019 6:21 pm


No ... it‘s not me :cheer:
0 x

User avatar
FJR919
Pressure Building
Pressure Building
Posts: 77
Joined: Apr 1st, 2018
Location: Hudson Valley, NY
Bike(s): H2SXSE ,2015 ZX14R, 2018 BMW K1600B , 2016 Yamaha FJR1300, 2016 Suzuki GSX S1000F, 2014 HondaCB1100
x 36

Re: Murph's bar riser design update #3

Post by FJR919 » Thu Aug 22, 2019 7:27 pm


UFO wrote:
Thu Aug 22, 2019 5:57 pm
FJR919 wrote:
Thu Aug 22, 2019 5:11 pm
Any updates?
Someone asked the same thing on facebook (maybe you?). Here was my reply there:
Still waiting on more machining. I worked as a design engineer in the tech industry for 25 years. If I had my own 3D printing and machining capability this would have been a 2 week job...from first design to being ready for production, not a 5 month job. I volunteered to do the CAD work, everything else is outside my control. /shrug
:bash:
No, it wasn't me; I'm not on Facebook. Don't want to bug you, I'm just eager to get a set. Thanks for the update.
0 x

User avatar
UFO
Medium Boost
Medium Boost
Posts: 356
Joined: Nov 30th, 2017
Location: PNW, USA
Bike(s): '18 H2SX SE
x 53
x 244

Re: Murph's bar riser design update #3

Post by UFO » Sat Aug 24, 2019 2:41 pm


The left side machined prototype was mailed to me. I might be able to test fit it in a few days.

Sorry for the delays, super frustrating for me as well.
0 x

Various... ➡ 2000 Hayabusa ➡ 2002 VFR ➡ 2003 FJR1300 ➡ 2010 Multistrada ➡ 2018 H2SX SE #510 "Godzilla"

User avatar
Fitz
Boost Engaged
Boost Engaged
Posts: 48
Joined: Sep 21st, 2018
x 2
x 10

Re: Murph's bar riser design update #3

Post by Fitz » Fri Sep 06, 2019 11:26 pm


Bump for a good project. I think this will be the way to go over that one companies versys esque wide bars or a simple pricey spacer.
0 x

User avatar
SDH2Mike
Boost Engaged
Boost Engaged
Posts: 21
Joined: Sep 20th, 2019
x 3

Re: Murph's bar riser design update #3

Post by SDH2Mike » Tue Sep 24, 2019 11:08 am


I did email Murphs about info on this setup last week. Oscar replied back stating they were deep into the project but didn’t comment about any height or changes at this time. So maybe in a week or two they may have specifics. I’m hoping it better than a half inch change.
0 x

User avatar
FJR919
Pressure Building
Pressure Building
Posts: 77
Joined: Apr 1st, 2018
Location: Hudson Valley, NY
Bike(s): H2SXSE ,2015 ZX14R, 2018 BMW K1600B , 2016 Yamaha FJR1300, 2016 Suzuki GSX S1000F, 2014 HondaCB1100
x 36

Re: Murph's bar riser design update #3

Post by FJR919 » Wed Oct 09, 2019 1:30 am


Bump for this eagerly awaited product.
0 x

User avatar
UFO
Medium Boost
Medium Boost
Posts: 356
Joined: Nov 30th, 2017
Location: PNW, USA
Bike(s): '18 H2SX SE
x 53
x 244

Re: Murph's bar riser design update #3

Post by UFO » Wed Oct 09, 2019 5:01 am


FJR919 wrote:
Wed Oct 09, 2019 1:30 am
Bump for this eagerly awaited product.
I sent CAD to Murphs and his machinist ~1.5 months ago to have a 2nd set machined up after there were problems with the first set.

I've heard or seen nothing from them since. And frankly, this process has been frustrating as hell.

If any of you want progress I suggest bugging him about it, because the ball is in their court, dead as a doornail. As I recall someone else on this forum was working with them and something similar happened, I can't recall exactly.

murph@murphskits.com
0 x

Various... ➡ 2000 Hayabusa ➡ 2002 VFR ➡ 2003 FJR1300 ➡ 2010 Multistrada ➡ 2018 H2SX SE #510 "Godzilla"

User avatar
swharton
New Member
New Member
Posts: 3
Joined: Aug 2nd, 2019
Location: reno
Bike(s): h2 se
x 1

Re: Murph's bar riser design update #3

Post by swharton » Wed Oct 09, 2019 4:10 pm


I have spoken with Murph. The Machinist should be underway this week on the prototype. I highly suggest anyone who is interested to contact Murph's and let them know.
Last edited by swharton on Sun Oct 13, 2019 4:07 pm, edited 1 time in total.
1 x

User avatar
FJR919
Pressure Building
Pressure Building
Posts: 77
Joined: Apr 1st, 2018
Location: Hudson Valley, NY
Bike(s): H2SXSE ,2015 ZX14R, 2018 BMW K1600B , 2016 Yamaha FJR1300, 2016 Suzuki GSX S1000F, 2014 HondaCB1100
x 36

Re: Murph's bar riser design update #3

Post by FJR919 » Thu Oct 10, 2019 3:20 pm


swharton wrote:
Wed Oct 09, 2019 4:10 pm
I have spoken with Murph. The Machinist should be underway this week on the first two sets. I highly suggest anyone who is interested to contact Murph's and let them know.
Done! I just sent him an email. Thanks.
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: Allen A, Prof J and 17 guests