intercooler testing done

Vendors, please post a thread about your H2SX products here.
User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 730
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 232
x 534

intercooler testing done

Post by vcyclenut » Wed May 29, 2019 8:54 pm


First I want to thank Travis at Yager Werx for his great customer service and product http://yagerautowerx.com/

Last week I installed his intercooler kit on my h2sx and today I got to test it. All I can say is WOW!

My previous best run with my H2sx was 235 hp. It was 30 degrees cooler and around 6% less humidity then today so when I did my baseline I started at 220 hp. ( comparison run with conditions attached)

after tuning with the intercooler I achieved a new personal best 240 hp! Despite the miserable conditions. The other crazy impressive thing was how I was able to do many runs back to back with no drop off. Try that without the intercooler. My intake temps used to hit 190 degrees after a run. Today I never saw temps over 140. Remember this is sitting still on a Dyno with just cooling fans running.

Riding down the road it will be even more dramatic. I could not be happier with the results

obviously I will have mail in tunes available for the intercooler set up, what I learned with tuning on it today I could easily apply to any of my baseline tunes pre intercooler.

one of the other really cool things the intercooler did was allow me to run my RICHER air/fuel ratio with no drop off in power. With out the intercooler the bike will make more power on the dyno by leaning it out to air fuel ratio's that I would never a tune a boosted bike to, now it makes as much power at the safe proper air fuel as it does at the let me impress my friends air/fuel ratio.

BTW travis found all of these things when he tuned the h2sx he did the first install on. I sent him a base file to use to start tuning with. He thought it was a little rich for best power but ended up my fueling was right on. It is the cooler intake temps that allow for more aggressive timing numbers that give the gains.

VERY COOL!

I highly recommend this if your going to be running your bike hard , not just for the power gains but for the reliability it is going to have to add to the bike.
image3.jpeg
image4.jpeg
image1.jpeg
5 x

User avatar
2HYPR
Low Boost
Low Boost
Posts: 176
Joined: Jul 5th, 2018
Location: Shanghai
Bike(s): H2 SX SE
x 95
x 107

Re: intercooler testing done

Post by 2HYPR » Wed May 29, 2019 9:05 pm


240 HP ? No way it's impossible fake fake blah blah blah... :)

Nice work well done, welcome to the club :) ... and YES off the dyno it is waaaaay better... :) - now go and get some BST carbon wheels!
1 x

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 730
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 232
x 534

Re: intercooler testing done

Post by vcyclenut » Wed May 29, 2019 9:34 pm


lol, thanks

I like the stock wheels. I have BST's on one of my other bikes im not sure if I will add them the H2sx or not
0 x

User avatar
Bryan468
Low Boost
Low Boost
Posts: 118
Joined: Apr 2nd, 2019
x 45
x 58

Re: intercooler testing done

Post by Bryan468 » Thu May 30, 2019 1:32 am


Very nice!

Now that we know it works I’m curious to know when we will have the opportunity to buy the set up and how much it will cost.
1 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, 1/2” bar spacers, turbo smart bov, Scott’s steering damper, Adams extended swing arm, custom led integrated tail light.

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 730
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 232
x 534

Re: intercooler testing done

Post by vcyclenut » Thu May 30, 2019 9:45 am


Bryan468 wrote:
Thu May 30, 2019 1:32 am
Very nice!

Now that we know it works I’m curious to know when we will have the opportunity to buy the set up and how much it will cost.

its available now from Travis, link to his website in the first post

cost is $1800
2 x

User avatar
Bryan468
Low Boost
Low Boost
Posts: 118
Joined: Apr 2nd, 2019
x 45
x 58

Re: intercooler testing done

Post by Bryan468 » Thu May 30, 2019 2:56 pm


vcyclenut wrote:
Thu May 30, 2019 9:45 am
Bryan468 wrote:
Thu May 30, 2019 1:32 am
Very nice!

Now that we know it works I’m curious to know when we will have the opportunity to buy the set up and how much it will cost.

its available now from Travis, link to his website in the first post

cost is $1800
That seems like a fair price. Will he have kits ready to go? Will we have to send him our intake?
0 x

Vcyclenut ecu flash, zx10 header, pair valve delete, sprint filter, 1/2” bar spacers, turbo smart bov, Scott’s steering damper, Adams extended swing arm, custom led integrated tail light.

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 730
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 232
x 534

Re: intercooler testing done

Post by vcyclenut » Thu May 30, 2019 4:32 pm


Bryan468 wrote:
Thu May 30, 2019 2:56 pm
vcyclenut wrote:
Thu May 30, 2019 9:45 am
Bryan468 wrote:
Thu May 30, 2019 1:32 am
Very nice!

Now that we know it works I’m curious to know when we will have the opportunity to buy the set up and how much it will cost.

its available now from Travis, link to his website in the first post

cost is $1800
That seems like a fair price. Will he have kits ready to go? Will we have to send him our intake?
I had to send my lid In but im not sure his plans, please reach out to him with questions. I just put this info out for everyone I am not selling his kits or anything like that
2 x

User avatar
WR-NA
Pressure Building
Pressure Building
Posts: 76
Joined: Mar 15th, 2018
Bike(s): 2009 ZX6R (Race), 2011 ZX10R, 2016 ZX10R, 2017 Z125 Pro, 2018 Ninja 400 (Race), 2019 Ninja H2
x 44
x 72

Re: intercooler testing done

Post by WR-NA » Fri May 31, 2019 7:57 am


Bryan468 wrote:
Thu May 30, 2019 2:56 pm
vcyclenut wrote:
Thu May 30, 2019 9:45 am
Bryan468 wrote:
Thu May 30, 2019 1:32 am
Very nice!

Now that we know it works I’m curious to know when we will have the opportunity to buy the set up and how much it will cost.

its available now from Travis, link to his website in the first post

cost is $1800
That seems like a fair price. Will he have kits ready to go? Will we have to send him our intake?
Travis makes kits as they come in or are ordered. They require the top half of the plenum to be sent to him for retrofitting of the exchanger core, the plumbing, the reservoir/pump, etc, etc, etc. Your OEM top half of the plenum will be cut and modified and resealed and it will be sent back along with the rest of the needed items. Very good setup. This is the exact same setup I am putting in my 2019 H2 once he tells me he has my parts :)
3 x

User avatar
Prof J
Medium Boost
Medium Boost
Posts: 526
Joined: May 29th, 2019
Location: Oregon, USA
Bike(s): '19 SE +
x 60
x 79

Re: intercooler testing done

Post by Prof J » Sat Oct 19, 2019 6:53 am


vcyclenut wrote:
Wed May 29, 2019 9:34 pm
lol, thanks

I like the stock wheels. I have BST's on one of my other bikes im not sure if I will add them the H2sx or not
David, what are your thoughts on your BST reasoning/choice?
0 x

User avatar
vcyclenut
Chirp-Chirp!
Chirp-Chirp!
Posts: 730
Joined: Jan 22nd, 2018
Location: fort myes, florida
x 232
x 534

Re: intercooler testing done

Post by vcyclenut » Sat Oct 19, 2019 2:06 pm


Prof J wrote:
Sat Oct 19, 2019 6:53 am
vcyclenut wrote:
Wed May 29, 2019 9:34 pm
lol, thanks

I like the stock wheels. I have BST's on one of my other bikes im not sure if I will add them the H2sx or not
David, what are your thoughts on your BST reasoning/choice?
im not sure what you are asking me, I actually have BST's on order for it
0 x

Post Reply
meble kuchenne na wymiar warszawa cennik

Who is online

Users browsing this forum: No registered users and 1 guest