Search found 31 matches

by KompreSXor
Sun Oct 06, 2019 8:09 pm
Forum: Mods & Maintenance
Topic: Zx10rr brembo callipers?
Replies: 5
Views: 109

Zx10rr brembo callipers?

I’m pretty sure that the SE+ Brembos will fit a normal SE, but does anyone know if the Brembos from a 2017~18 zx10rr will fit?

There are a few on eBay and I’m tempted.. :clap:
by KompreSXor
Mon Sep 30, 2019 12:07 pm
Forum: Mods & Maintenance
Topic: Exhaust bracket - footpeg delete
Replies: 2
Views: 92

Re: Exhaust bracket - footpeg delete

It looks home made/fabricated to me. When you zoom in it looks like steel strips welded together and then painted or powder coated. If it’s an eBay listing try messaging the seller?
by KompreSXor
Thu Sep 26, 2019 7:13 pm
Forum: Mods & Maintenance
Topic: Fake vent!! No..
Replies: 5
Views: 203

Re: Fake vent!! No..

Yeh, maybe. The real air intake has several holes, at least one facing down.. I think these are water drainage. Six facing the left fork leg, for the chirp noise to escape? So I figured there is already lots of air in and around the fairing. I suppose time will tell.. If it stops raining for more th...
by KompreSXor
Thu Sep 26, 2019 5:48 pm
Forum: Mods & Maintenance
Topic: Fake vent!! No..
Replies: 5
Views: 203

Re: Fake vent!! No..

I did intend to make a functional intake that fed cold air to the top of the radiator, but the ECU encroaches on the aperture from the top, the headlight bracket from the side, and the brake lines to the ABS module are directly in the path of an intake. Obviously Kawasaki never intended to fit an in...
by KompreSXor
Thu Sep 26, 2019 5:30 pm
Forum: Mods & Maintenance
Topic: Fake vent!! No..
Replies: 5
Views: 203

Fake vent!! No..

Now the weather has turned to shit, I’ve stripped my bike for a full clean. Only had one winter job on my mind, and it was the awful cheap looking fake air intake. I got hold of a second hand grill and intake, and after some (a lot!) of modification I’ve got two vents now a bit like the h2r :D It lo...
by KompreSXor
Sat Sep 14, 2019 1:29 pm
Forum: Mods & Maintenance
Topic: Grips
Replies: 5
Views: 498

Re: Grips

Mine have started to feel slightly sticky, I’m at just over 7k. Only feel sticky on my bare hands, not with gloves on. I tend to clean them with a wet microfibre cloth. It seems to take away the stickiness for a while.

Uk btw.. not exactly “warm” here..😆
by KompreSXor
Sun Sep 08, 2019 4:53 pm
Forum: Mods & Maintenance
Topic: Burning a little oil out the exhaust on start up?
Replies: 5
Views: 198

Re: Burning a little oil out the exhaust on start up?

Mine doesn’t burn any oil at startup, there’s no visible smoke at all, is there oil in your air intake/air filter housing? This could make your bike smoke, other than that it might be something more serious. I ordered another drain bottle and hose and replaced the tiny pinched piece of tube, this al...
by KompreSXor
Sat Aug 31, 2019 6:07 am
Forum: Kickin' Tires
Topic: For folks running a flash ...
Replies: 30
Views: 888

Re: For folks running a flash ...

2018 SXSE Custom flash with dyno time Lambda flashed out Exhaust servo flashed out KLEEN air system (pair) flashed out and blanked Redline NOT changed Stock gearing Zx10r headers, Zx10r 3/4 titanium arrow 400mm can, 60mm link pipe Sprint filter Dropped 17kg weight overall Owned from new, break in by...
by KompreSXor
Tue Aug 13, 2019 4:24 pm
Forum: Kickin' Tires
Topic: Warped front rotors
Replies: 16
Views: 504

Re: Warped front rotors

I’ve heard of zzr1400 gen1 rotors warping, but they apparently sorted them for gen 2. I hope they don’t warp on my H2! As for the rear bearing grease, I recently stripped my bike down after a tour in Europe. I stripped the rear completely, and there was only a small amount of grease in the needle ro...
by KompreSXor
Mon Aug 12, 2019 2:10 pm
Forum: Mods & Maintenance
Topic: Weight Saving SE Model
Replies: 6
Views: 241

Weight Saving SE Model

Ive set about removing some of the weight from my H2, I'm pleased with the list so far, Is anyone else bothered? or are you leaving your bikes stock? Big losses are the battery, exhaust and centre stand, but all the titanium fasteners look great, don't rust and shave a few more grams off! It does fe...